MDT

The MDT Presence Detector is available in several versions, Presence Detector with light sensor and Presence Detector with light sensor plus constant level light intensity. The Presence Detectors captures the smallest movements with 1-4 pyro sensors and h

The MDT Presence Detector is available in several versions, Presence Detector with light sensor and Presence Detector with light sensor plus constant level light intensity. The Presence Detectors captures the smallest movements with 1-4 pyro sensors and h

PT 1000 Sensor standard
Dimensions 4mm x 30mm, cable length 1m

PT 1000 Sensor standard
Afmetingen 6 mm x 50 mm, aansluitkabel 3 m

Cable set Touch panel accessory VisuControl 10“/25,6cm

Cable set Touch panel accessory VisuControl 7 "/ 17.7 cm

PT 1000 Sensor strap on installation
Dimensions 8mm x 40mm, cable length 3m

PT 1000 Sensor ceiling installation
Cut out Diameter: 23mm, Depth: 28mm

The inputs of the MDT Universal Interface react depending on their programmed parameters and send a telegram on the KNX bus.
You can connect conventional push-buttons or auxiliary contacts (eg door and window contacts) to the device

The inputs of the MDT Universal Interface react depending on their programmed parameters and send a telegram on the KNX bus.
You can connect conventional push-buttons or auxiliary contacts (eg door and window contacts) to the device

The MDT Push Button Lite 55 Basic releases KNX telegrams depending on the paramerization after pressing the buttons.The push buttons can be programmed for 1 or 2 button operation. In addition to switching, dimming, blinds, scenes or sending values, a lot

The MDT KNX Push Button releases KNX telegrams after pushing the buttons on top.

The MDT Push Button Lite 63 releases KNX telegrams depending on the paramerization after pressing the buttons. The push buttons can be programmed for 1 or 2 button operation (BE-TAL63x4.01: 4 single buttons). The RGBW status LEDs can be controlled with in

The MDT Push Button Lite 55 releases KNX telegrams after pressing the buttons, 1 or 2 Button operation can be programmed.
Each button has two RGBW status LEDs. In addition to switching, dimming, shutters or sending values, numerous functions are availabl

The MDT Push Button Lite 55 Basic releases KNX telegrams depending on the paramerization after pressing the buttons.The push buttons can be programmed for 1 or 2 button operation. In addition to switching, dimming, blinds, scenes or sending values, a lot

The MDT KNX Push Button releases KNX telegrams after pushing the buttons on top.

The MDT Push Button Lite 63 releases KNX telegrams depending on the paramerization after pressing the buttons. The push buttons can be programmed for 1 or 2 button operation (BE-TAL63x4.01: 4 single buttons). The RGBW status LEDs can be controlled with in

The MDT Push Button Lite 63 releases KNX telegrams depending on the paramerization after pressing the buttons. The push buttons can be programmed for 1 or 2 button operation (BE-TAL63x4.01: 4 single buttons). The RGBW status LEDs can be controlled with in

The MDT Push Button Lite 55 releases KNX telegrams after pressing the buttons, 1 or 2 Button operation can be programmed.
Each button has two RGBW status LEDs. In addition to switching, dimming, shutters or sending values, numerous functions are availabl

The MDT Push Button Lite 55 releases KNX telegrams after pressing the buttons, 1 or 2 Button operation can be programmed.
Each button has two RGBW status LEDs. In addition to switching, dimming, shutters or sending values, numerous functions are availabl

The MDT Push Button Lite 63 releases KNX telegrams depending on the paramerization after pressing the buttons. The push buttons can be programmed for 1 or 2 button operation (BE-TAL63x4.01: 4 single buttons). The RGBW status LEDs can be controlled with in

The MDT Push Button Lite 55 releases KNX telegrams after pressing the buttons, 1 or 2 Button operation can be programmed.
Each button has two RGBW status LEDs. In addition to switching, dimming, shutters or sending values, numerous functions are availabl

The MDT Switch Actuator AKK receives KNX/EIB telegrams and switches up to 3 independent electrical loads.
Each output uses relay (AKK-01UP.03: bistable relais, AKK-02/03UP.03: monostable relais).

The MDT Push Button Lite 63 releases KNX telegrams depending on the paramerization after pressing the buttons. The push buttons can be programmed for 1 or 2 button operation (BE-TAL63x4.01: 4 single buttons). The RGBW status LEDs can be controlled with in