Collection

The MDT LED Controller receives KNX/EIB telegrams and controls 12/24V RGBW LED stripes.

The MDT Push Button Smart 86 releases KNX telegrams after pressing the push buttons on top, 1 or 2 Button operation can be adjusted. The device provides extensive functions like switching of lighting, operation of blinds and shutters, contact type and blo

Analog In-/Output 2-fold
Flush mounted, input voltage 0-12V/2-10V
or current loop 0-20mA/4-20mA
output voltage 0-10V

The MDT KNX RF+ Socket receives KNX/EIB telegrams and switches one electrical load.

The MDT Glass Push Button II Smart releases KNX telegrams after touching the sensor areas on top, 1 or 2 Button operation can be adjusted. The device provides extensive functions like switching of lighting, operation of blinds and shutters, contact type a

Intuitive KNX control with color display and temperature sensor. Customizable functions for smart home automation.

MDT CO2/VOC Combo Sensor 55: measures CO2, VOC, temperature, and humidity for air quality control in spaces. Fits standard switch programs.

MDT DALI Control PRO64 Gateway: Advanced KNX & DALI-2 support for 64 ECGs/16 groups, HSV/RGB/RGBW color control, web interface for easy commissioning.

The MDT Room Temperature Controller Smart with integrated temperature and humidity sensor is used for indoor room temperature regulation. Switch Acuators/Heating Actuators with electrothermic valves or motorized KNX actuators can be controlled by the Room

The MDT Glass Push Button II Smart releases KNX telegrams after touching the sensor areas on top, 1 or 2 Button operation can be adjusted. The device provides extensive functions like switching of lighting, operation of blinds and shutters, contact type a

KNX IP Interface: The IP Interface enables the communication between the PC and the KNX/EIB system via LAN.
The KNX IP Interface allows to programm the KNX bus via TCP/IP, 4 simultaneous connections possible.

The MDT Logic Module is used for fast and easy compilation of Logic functions to control building automation systems. All the functions are parametrized directly in the ETS without additionally software tools. There are 24 independent function blocks with

Compact VisuControl Easy II object server for KNX systems: visualizes and controls up to 200 functions. Supports RGB, IP cameras, VPN, and email alerts. No external power supply needed.

Depending on its parameterization the MDT Glass Push Button II Lite releases KNX telegrams. The sensor areas can be programmed for 1 or 2 button operation (BE-GTL4xx.01: 4 single sensor buttons). The RGBW status LEDs can be controlled with internal or ext

The MDT Heating Actuator receives KNX/EIB telegrams and controls up to independent electrical outputs.
Each channel has its own LED indicator

The inputs of the MDT Universal Interface react depending on their programmed parameters and send a telegram on the KNX bus.
You can connect conventional push-buttons or auxiliary contacts (eg door and window contacts) to the device

The inputs of the MDT Universal Interface react depending on their programmed parameters and send a telegram on the KNX bus.
You can connect conventional push-buttons or auxiliary contacts (eg door and window contacts) to the device

The MDT Universal Actuator with monostable relays can be used as Switch Actuator 2-fold or Shutter Actuator 1-fold and is individually programmable by the ETS. Switching, alarm, central and lock functions are available as well as extensive calibration and

The Universal Interface detects status changes at the inputes and triggers KNX telegrams depending on his parameterizations.

The MDT Switch Actuator receives KNX/EIB telegrams and switches up to 12 independent electrical loads.
The MDT Switch Actuator offers current measurement for each channel and measurement of the total current.
The measured data can be transmit in differe

The MDT VisuControl Touch Panel is used for the visualisation of the current building status and to control building functions.

The MDT KNX RF+ Wireless Line Coupler connects MDT KNX RF+ devices with the KNX bus. The line coupler has extensive filtering functions to minimize bus load on the wireless route.

The MDT Motion Detector/Automatic Switch with light sensor captures the smallest movements with its built in pyro detectors and high resolution lens. It is possible to configure 2 separate light channels, one HVA channel and one channel for room monitorin

The MDT Temperature Controller is used for all purpose temperature control applications. The temperature is received as an KNX object or directly from the connected PT1000 temperature sensors (Only SCN-RT6AP.01, SCN-RT2UP.01 or SCN-RT4UP.01).