Collection
Wireless magnetic contact for surface mounting in door or window, which detects and notifies their opening/closing through the KNX RF standard (868 MHz)
Available colours:
Black (Ref. ZRFWDB)
White (Ref. ZRFWDW)
Grey (Ref. ZRFWDG)
Dark brown (Ref.
€78,81 Incl. tax
The Gira X1 was developed specifically for Smart Homes with a KNX network. It enables you to connect a variety of devices and monitor automated processes via app. Minimum effort for maximum comfort.
€927,91 Incl. tax
ISE SMART CONNECT KNX REMOTE ACCESS
Secure remote access from anywhere, whether mobile or landline. Unpack, connect and you’re ready to go.
Users and electricians profit from the significant advantages of remote access: Easy set-up and secure remote ins
€565,94 Incl. tax
For single-phase and three-phase counters
Import and export of active power
Current and voltage per phase
Active energy (2 tariffs)
€202,66 Incl. tax
ISE SMART CONNECT KNX HUE
The Philips Hue lighting system can now also be operated via KNX. Colour value, temperature and brightness can be defined for every light, making each completely customisable.
€303,65 Incl. tax
ISE SMART CONNECT KNX SONOS
Easily control up to ten Sonos master devices, each with up to 5 slaves per master, via KNX. Optionally, each room can be operated separately or, using party mode, the entire house simultaneously.
€355,23 Incl. tax
KNX USB Interface Stick 332
The KNX USB Stick 332 is a data interface between a PC or laptop and the KNX installation bus. It can be used as a programming interface for ETS® Software Version 3 (or higher) and supports KNX long frames. Long telegrams enab
€147,75 Incl. tax
The MDT LED Controller receives KNX/EIB telegrams and controls 12/24V RGBW LED stripes.
€212,36 Incl. tax
The MDT Push Button Smart 86 releases KNX telegrams after pressing the push buttons on top, 1 or 2 Button operation can be adjusted. The device provides extensive functions like switching of lighting, operation of blinds and shutters, contact type and blo
€174,60 Incl. tax
Touch control TC5 UP 205/22 black or white
Aluminium and glas housing
Capacitive touch colour display 5", 480 x 854 pixels
LED colour light strip as orientation light, respectively to signal alarms
Integrated room temperature sensor
€441,42 Incl. tax
For disconnecting the bus line from the power supply. The device has a reset switch for isolating the bus voltage and resetting the bus devices connected to this line. Connection to ABB i-bus® via bus connection terminal.
€49,97 Incl. tax
The KNX IP BAOS 777 is a powerful universal device for KNX installation: Thanks to the integrated web server, the device enables the visualization and control of buildings, rooms and functions in a standard web browser on a PC or mobile devices such as sm
€362,19 Incl. tax
WEINZIERL 5256 KNX Modbus RTU Gateway
The KNX Modbus RTU Gateway 886 is a compact KNX/Modbus gateway with 250 freely configurable channels (KNX data points). The device allows easy integration of Modbus devices supporting the RTU protocol via RS-485 into
€279,28 Incl. tax
Compact power supply 1280 mA with integrated choke. Rapid diagnosis ETS communication objects. Operational status and bus line analysis possible by means ETS. Extra voltage output for feeding an extra line in combination with an extra choke.
€289,13 Incl. tax
The ISE Smart Connect KNX E-Charge II is a powerful solution for charging electric vehicles. It offers five charging points per device, Dynamic Load Management (DLM), support of different manufacturers, network-supported control.
€507,18 Incl. tax
Analog In-/Output 2-fold
Flush mounted, input voltage 0-12V/2-10V
or current loop 0-20mA/4-20mA
output voltage 0-10V
€116,09 Incl. tax
The KNX IP Interface 731 has a width of only 1 module (18 mm) and is powered by the KNX bus. The device is an interface between IP and KNX and can be used as programming interface for ETS® Software. You can access the KNX Bus from every point of your LAN.
€165,12 Incl. tax
ZMCoup RF 868
KNX Media coupler for the interconnection of KNX TP lines with wireless KNX RF medium (868 MHz). Support for extended frames (APDU 254 bytes).
Frequency transmission will depend on the frequency used in the country where the project takes
€202,95 Incl. tax
PWM-60-12KN
AC-DC Single output LED driver Constant Voltage (CV); PWM output for LED strips; Output 12Vdc at 5A; Dimming with KNX; IP67
€65,01 Incl. tax
The MDT KNX RF+ Socket receives KNX/EIB telegrams and switches one electrical load.
€146,29 Incl. tax
KNX Push Button Sensor, 4/6/8 buttons integrates the basic control functions of Switch, Dimming, RGB/RGBW lighting,
€193,45 Incl. tax
The KNX DMX Gateway 544 is a compact gateway between KNX and DMX512 with up to 64 freely configurable channels. DMX is a protocol for lighting control, especially in stage technology.
€240,55 Incl. tax
Intuitive KNX control with color display and temperature sensor. Customizable functions for smart home automation.
€158,63 Incl. tax
The MDT Glass Push Button II Smart releases KNX telegrams after touching the sensor areas on top, 1 or 2 Button operation can be adjusted. The device provides extensive functions like switching of lighting, operation of blinds and shutters, contact type a
€190,33 Incl. tax
MDT DALI Control PRO64 Gateway: Advanced KNX & DALI-2 support for 64 ECGs/16 groups, HSV/RGB/RGBW color control, web interface for easy commissioning.
€519,37 Incl. tax
MDT CO2/VOC Combo Sensor 55: measures CO2, VOC, temperature, and humidity for air quality control in spaces. Fits standard switch programs.
€247,32 Incl. tax
PWM-200KN Constant Voltage LED Driver 200W 24V, KNX secure
€99,97 Incl. tax
AC-DC KNX EIB DIN rail power supply with integrated choke; Output 30Vdc at 640mA; basic function
€87,73 Incl. tax
KNX IP Interface: The IP Interface enables the communication between the PC and the KNX/EIB system via LAN.
The KNX IP Interface allows to programm the KNX bus via TCP/IP, 4 simultaneous connections possible.
€213,54 Incl. tax
4 fold Control device 1-10V 4SU MDRC, 10A C-load KNX SECURE
€175,87 Incl. tax
The MDT Glass Push Button II Smart releases KNX telegrams after touching the sensor areas on top, 1 or 2 Button operation can be adjusted. The device provides extensive functions like switching of lighting, operation of blinds and shutters, contact type a
€190,33 Incl. tax
The MDT Logic Module is used for fast and easy compilation of Logic functions to control building automation systems. All the functions are parametrized directly in the ETS without additionally software tools. There are 24 independent function blocks with
€161,17 Incl. tax
This interface allows establishing a bidirectional connection between a PC or a laptop and the KNX RF wireless network. The device complies with the specification of KNX RF and supports the protocol cEMI.
€143,69 Incl. tax
Compact VisuControl Easy II object server for KNX systems: visualizes and controls up to 200 functions. Supports RGB, IP cameras, VPN, and email alerts. No external power supply needed.
€481,91 Incl. tax
Article 5267 Universal 48 channels input/output
The KNX TP Multi IO 570 (48I/O) is a universal binary interface for building control. It provides 48 I/O lines. Each line can be used as binary input as well as binary output.
€386,40 Incl. tax