KNX RF sensoren

Wireless magnetic contact for surface mounting in door or window, which detects and notifies their opening/closing through the KNX RF standard (868 MHz)

Available colours:
Black (Ref. ZRFWDB)
White (Ref. ZRFWDW)
Grey (Ref. ZRFWDG)
Dark brown (Ref.

Wireless KNX-RF multisensor for temperature, brightness, and humidity. Programmable with ETS5, featuring alarms for overheating, sun protection, and humidity. Battery-powered with a lifespan of over 8 years.

Wireless KNX-RF S-Mode dimmer for RGB LED strips. 3 channels for RGB or single-colored LED strips with PWM control. Configurable via ETS5, with analog and digital inputs.

Wireless sensor for temperature, humidity, and brightness. Easy installation without KNX bus cables. Compatible with ETS5 for advanced configuration. Battery life >8 years.

Wireless door/window contact sensor for detecting open/closed status. Battery-powered (life >12 years). KNX-RF S-Mode, configurable via ETS5.

Wireless KNX-RF motion sensor with PIR technology and daylight sensor. Recessed ceiling mount, battery-powered with >10 years lifespan. 360º detection, Ø7m range at 2.5m height. Programmable via ETS5.

Wireless KNX-RF interface with 2 channels for switching, dimming, or blinds control. Easy installation without wiring, includes temperature and battery status sensor. Programmable with ETS5 or higher.

The KNX RF / ENO Push Button 440 secure unites two wireless protocols in one device: EnOcean and KNX RF. Out of the box the push button operates in EnOcean mode.

The KNX RF+ 2-fold switch actuator controls up to 2 independent loads via KNX RF+. With 10A power, time functions, and scenes, ideal for modern installations without KNX wiring.

Remote control for lighting and shutters. Supports 5 channels and scenes. RF-KNX compatible. Battery-powered, lasts >8 years. Ideal for dimming, switching, and scenes.

Wireless RF-KNX pushbutton with 1 channel, perfect for switching, dimming, shutter control, or scene launching. Battery-powered, easy to install, compatible with KNX systems.

The KNX RF / ENO Push Button 440 secure unites two wireless protocols in one device: EnOcean and KNX RF. Out of the box the push button operates in EnOcean mode.

The MDT KNX RF+ Glas Push Button Plus releases KNX telegrams after touching the sensor areas on top, 1 or 2 button operation can be parameterized.

The MDT KNX Push Button Plus releases KNX telegrams after pushing the buttons on top.

The Universal Interface detects status changes at the inputes and triggers KNX telegrams depending on his parameterizations.

The MDT KNX Push Button Plus releases KNX telegrams after pushing the buttons on top.

The MDT KNX Push Button Plus releases KNX telegrams after pushing the buttons on top.

The MDT KNX Push Button Plus releases KNX telegrams after pushing the buttons on top.

The MDT KNX RF+ Glas Push Button Plus releases KNX telegrams after touching the sensor areas on top, 1 or 2 button operation can be parameterized.