KNX RF

Universal dimmer for RLC/LED, max 250W. Suitable for flush-mounting, KNX-RF support, includes scenes and timer function.

ZMCoup RF 868
KNX Media coupler for the interconnection of KNX TP lines with wireless KNX RF medium (868 MHz). Support for extended frames (APDU 254 bytes).
Frequency transmission will depend on the frequency used in the country where the project takes

Compact KNX RF/TP Coupler 673.1 secure for integrating KNX RF devices, supports long frames & KNX Data Security.

The MDT KNX RF+ Wireless Line Coupler connects MDT KNX RF+ devices with the KNX bus. The line coupler has extensive filtering functions to minimize bus load on the wireless route.

The Universal Interface detects status changes at the inputes and triggers KNX telegrams depending on his parameterizations.

The MDT KNX RF+ Switch Actuator receives KNX/EIB telegrams ans switchs up to 2 indipendent electrical loads.
Each output uses a monostable relay.

The MDT KNX RF+ Wireless Switch Actuator receives KNX / EIB telegrams and switches one consumer. The output is switched via a monostable relay

The MDT KNX RF+ Socket receives KNX/EIB telegrams and switches one electrical load.

The MDT KNX RF+ Socket receives KNX/EIB telegrams and switches one electrical load.

The MDT KNX RF+ Shutter Actuator receives KNX/EIB telegrams and controls 1 indipendent shutter or sunblind drive.
The output uses two monostable relays.

The MDT KNX Push Button Plus releases KNX telegrams after pushing the buttons on top.

The MDT KNX Push Button Plus releases KNX telegrams after pushing the buttons on top.

The MDT KNX Push Button Plus releases KNX telegrams after pushing the buttons on top.

The MDT KNX Push Button Plus releases KNX telegrams after pushing the buttons on top.

The MDT KNX RF+ Glas Push Button Plus releases KNX telegrams after touching the sensor areas on top, 1 or 2 button operation can be parameterized.

The MDT KNX RF+ Glas Push Button Plus releases KNX telegrams after touching the sensor areas on top, 1 or 2 button operation can be parameterized.

This interface allows establishing a bidirectional connection between a PC or a laptop and the KNX RF wireless network. The device complies with the specification of KNX RF and supports the protocol cEMI.

Wireless magnetic contact for surface mounting in door or window, which detects and notifies their opening/closing through the KNX RF standard (868 MHz)

Available colours:
Black (Ref. ZRFWDB)
White (Ref. ZRFWDW)
Grey (Ref. ZRFWDG)
Dark brown (Ref.

The KNX RF / ENO Push Button 440 secure unites two wireless protocols in one device: EnOcean and KNX RF. Out of the box the push button operates in EnOcean mode.

The KNX RF / ENO Push Button 440 secure unites two wireless protocols in one device: EnOcean and KNX RF. Out of the box the push button operates in EnOcean mode.

KNX-RF wireless temperature, luminosity & humidity multi-sensor

Wireless door/window contact sensor KNX-RF S-Mode for detecting the state (closed/open) of a door or window over the reed contact integrated in the device.
Battery-operated: 2 batteries x 3V CR2032. Useful life highr than 12 years.

Wireless KNX RF S-Mode Temperature and Relative Humidity Sensor.
The communication with the bus must be done by using a KNX/KNX RF S-Mode media coupler.

KNX-RF Easy Mode
Wireless 1-channel Dimmer for 12V-48V single-color LED Strips.
Pulse Width Modulation (PWM) dimming technology.
Up to 8A dimming capacity (12V: 96W // 24V: 192W).