KNX RF
The MDT KNX RF+ Wireless Line Coupler connects MDT KNX RF+ devices with the KNX bus. The line coupler has extensive filtering functions to minimize bus load on the wireless route.
€268,93 Incl. tax
The MDT KNX RF+ Glas Push Button Plus releases KNX telegrams after touching the sensor areas on top, 1 or 2 button operation can be parameterized.
€223,68 Incl. tax
The KNX RF/TP Coupler is a compact KNX radio coupler.
It connects KNX RF devices of a radio line with the KNX Bus Twisted Pair.
The device has a filter table (8k byte). The coupler supports long frames
€208,80 Incl. tax
ZMCoup RF 868
KNX Media coupler for the interconnection of KNX TP lines with wireless KNX RF medium (868 MHz). Support for extended frames (APDU 254 bytes).
Frequency transmission will depend on the frequency used in the country where the project takes
€202,95 Incl. tax
Compact KNX RF/TP Coupler 673.1 secure for integrating KNX RF devices, supports long frames & KNX Data Security.
€185,69 Incl. tax
Wireless KNX-RF Motion Detectors, with Infrared detection technology, for recessed mounting in a false ceiling, powered by battery.
It has a highly sensitive PIR sensor, which, together with the lens design,
€184,19 Incl. tax
This interface allows establishing a bidirectional connection between a PC or a laptop and the KNX RF wireless network.
Máx.Longframe APDU: 205
€182,66 Incl. tax
The MDT KNX RF+ Glas Push Button Plus releases KNX telegrams after touching the sensor areas on top, 1 or 2 button operation can be parameterized.
€178,38 Incl. tax
1-channel KNX RF S-Mode Wireless Dimming Actuator for DALI Drivers or Ballasts, with LED or Fluorescence lighting.
Broadcast and uni-directional DALI communication.
Up to 64 DALI ECGs can be controlled.
€175,09 Incl. tax
The MDT KNX Push Button Plus releases KNX telegrams after pushing the buttons on top.
€155,73 Incl. tax
The Universal Interface detects status changes at the inputes and triggers KNX telegrams depending on his parameterizations.
€150,89 Incl. tax
The MDT KNX RF+ Wireless Switch Actuator receives KNX / EIB telegrams and switches one consumer. The output is switched via a monostable relay
€148,01 Incl. tax
The MDT KNX RF+ Socket receives KNX/EIB telegrams and switches one electrical load.
€146,29 Incl. tax
The MDT KNX RF+ Shutter Actuator receives KNX/EIB telegrams and controls 1 indipendent shutter or sunblind drive.
The output uses two monostable relays.
€146,29 Incl. tax
The MDT KNX RF+ Switch Actuator receives KNX/EIB telegrams ans switchs up to 2 indipendent electrical loads.
Each output uses a monostable relay.
€146,29 Incl. tax
The MDT KNX Push Button Plus releases KNX telegrams after pushing the buttons on top.
€146,29 Incl. tax
Wireless Dimmer for 1-10V Ballast or LED Driver, for example, Fluorescence or LED lighting fixtures.
Can control up to a maximum of 100 equipments.Junction-box mounting.
€145,15 Incl. tax
This interface allows establishing a bidirectional connection between a PC or a laptop and the KNX RF wireless network. The device complies with the specification of KNX RF and supports the protocol cEMI.
€143,69 Incl. tax
1-channel Wireless KNX-RF S-Mode wireless Switching Actuator.
Normally open contact, not free of voltage, 16A relay.
€137,24 Incl. tax
The MDT KNX Push Button Plus releases KNX telegrams after pushing the buttons on top.
€136,85 Incl. tax
3-channel KNX-RF S-Mode Wireless Dimming Actuator for RGB LED Strips.
Control of RGB or Single-colored LED Strips via Pulse Width Modulation (PWM).
It has 4 Analog/Digital inputs, which can be configured independently, through the ETS:
€129,02 Incl. tax
The MDT KNX RF+ Socket receives KNX/EIB telegrams and switches one electrical load.
€126,47 Incl. tax
The MDT KNX Push Button Plus releases KNX telegrams after pushing the buttons on top.
€126,47 Incl. tax
Wireless door/window contact sensor KNX-RF S-Mode for detecting the state (closed/open) of a door or window over the reed contact integrated in the device.
Battery-operated: 2 batteries x 3V CR2032. Useful life highr than 12 years.
€126,31 Incl. tax