Binary Inputs
Article 5267 Universal 48 channels input/output
The KNX TP Multi IO 570 (48I/O) is a universal binary interface for building control. It provides 48 I/O lines. Each line can be used as binary input as well as binary output.
€386,40 Incl. tax
The inputs of the MDT Universal Interface react depending on their programmed parameters and send a telegram on the KNX bus.
You can connect conventional push-buttons or auxiliary contacts (eg door and window contacts) to the device
€44,93 Incl. tax
The inputs of the MDT Universal Interface react depending on their programmed parameters and send a telegram on the KNX bus.
You can connect conventional push-buttons or auxiliary contacts (eg door and window contacts) to the device
€54,27 Incl. tax
Artikel 5238 IP Aktor and Interface
The KNX TP Multi IO 580 (48I/O) is a universal binary interface for building control. It provides 48 I/O lines. Each line can be used as binary input as well as binary output.
€457,40 Incl. tax
The inputs of the MDT Universal Interface react depending on their programmed parameters and send a telegram on the KNX bus.
You can connect conventional push-buttons or auxiliary contacts (eg door and window contacts) to the device
€83,31 Incl. tax
The KNX IO 410 (4I) is a compact binary input with 4 channels to control lights, shutter etc. The inputs can be connected to conventional switches with an external voltage of 12 to 230 V. Using as impulse counter is possible as well. T
€98,03 Incl. tax
UP 220/21
Pushbutton interface 2 x potential-free contact, output for LED control
2 inputs / outputs
€40,90 Incl. tax
4 Inputs for AC/DC 12...230 V
Max. cable length, unshielded, twisted 100 m
Bus-powered electronics
€118,27 Incl. tax
KNX Multifunction Actuator that can work as: 16-channel Switching Actuator or 8-channel Blinds/Shutters Actuator.
Incorporate 23 Inputs: 16-Binary Inputs + 7-Binary/Analog Inputs.
€426,07 Incl. tax
8 inputs AC/DC 12...230 V
8 relay contact outputs
Rated contact voltage AC 230 V
€366,19 Incl. tax
The KNX IO 520 (1J2I) is a compact blind actuator with two additional binary inputs. The actuator is used to control a blind, a shutter or a window drive. The relay contacts are electrically interlocked.
€97,48 Incl. tax
The MDT Binary Input is available in 4 versions, input detection of 24VAC/DC signals, input detection of 230VAC signals and inputs fot potential free contacts. The Binary Input reacts depending on its programmed parameters and sends a telegram on the KNX
€479,50 Incl. tax