Sensore and Controllers

Efficient MDT Energy Meter EZ for industry: measures energy consumption and production, suitable for 1- or 3-phase circuits, with integrated current measurement and true RMS.

KNX Panel 2-fold – 2 buttons with selectable functions: light on/off/toggle/dimming, shutters/ louvers, value setting, scene recall and programming (8Bit), 1 status LED – integrated bus coupler. Size: 50x75x35 mm

KNX Panel 2-fold – 2 buttons with selectable functions: light on/off/toggle/dimming, shutters/ louvers, value setting, scene recall and programming (8Bit), 1 status LED – integrated bus coupler. Size: 50x75x35 mm

The MDT Presence Detector is available in several versions, Presence Detector with light sensor and Presence Detector with light sensor plus constant level light intensity. The Presence Detectors captures the smallest movements with 1-4 pyro sensors and h

The MDT Presence Detector is available in several versions, Presence Detector with light sensor and Presence Detector with light sensor plus constant level light intensity. The Presence Detectors captures the smallest movements with 1-4 pyro sensors and h

The MDT Presence Detector is available in several versions, Presence Detector with light sensor and Presence Detector with light sensor plus constant level light intensity. The Presence Detectors captures the smallest movements with 1-4 pyro sensors and h

The MDT Temperature Controller is used for all purpose temperature control applications. The temperature is received as an KNX object or directly from the connected PT1000 temperature sensors (Only SCN-RT6AP.01, SCN-RT2UP.01 or SCN-RT4UP.01).

PT 1000 Sensor standard
Afmetingen 6 mm x 50 mm, aansluitkabel 3 m

The MDT Room Temperature/humidity sensor 55 detects temperature and humidity in indoor rooms, the dew point is calculated automatically. For the sensors the Min./Max values can be set in the paramerization of the device and approbiate actions can be defin

The MDT Room Temperature Controller Smart with integrated temperature and humidity sensor is used for indoor room temperature regulation. Switch Acuators/Heating Actuators with electrothermic valves or motorized KNX actuators can be controlled by the Room

The MDT Room Temperature Controller is used to control the indoor temperature, it has a working range from -10 to +50°C. The MDT Room Temperature Controller detects the temperature and releases telegrams in dependence on its parameterisation.

Room Temp

Brightness measurement, temperature measurement, sun protection control, lighting control
For the detection and transmission of brightness and temperature

For fixing the presence detectors UP 258D12 and UP 258E22 and the brightness sensor UP 255D21 as a surface mounting device

UP 285/13
Pushbutton, single, with status LED, titanium white, DELTA style
Pushbutton in pair
Vertical operation
Per pushbutton selectable function
LED for orientation light
Connectable bus coupling unit (BTM) or flush-mounted actuators via BTM

KNX Panel 4-fold – 4 buttons with selectable functions: light on/off/toggle/dimming, shutters/ louvers, value setting, scene recall and programming (8Bit), 2 status LEDs – integrated bus coupler. Size: 50x75x35 mm

The MDT Motion Detector/Automatic Switch with light sensor captures the smallest movements with its built in pyro detectors and high resolution lens. It is possible to configure 2 separate light channels, one HVA channel and one channel for room monitorin

The MDT Temperature Controller is used for all purpose temperature control applications. The temperature is received as an KNX object or directly from the connected PT1000 temperature sensors (Only SCN-RT6AP.01, SCN-RT2UP.01 or SCN-RT4UP.01).

The MDT Object Controller 63 with integrated temperature and humidity sensor is used for indoor room temperature regulation. The comfort zone of the indoor climate is set via Min./Max. values at the parameterization of the ObjectController. Switch Acuator

KNX Panel 6-fold – 6 buttons with selectable functions: light on/off/toggle/dimming, shutters/ louvers, value setting, scene recall and programming (8Bit), 4 status LEDs – integrated bus coupler. Size: 50x118x35 mm

KNX Panel 6-fold – 6 buttons with selectable functions: light on/off/toggle/dimming, shutters/ louvers, value setting, scene recall and programming (8Bit), 4 status LEDs – integrated bus coupler. Size: 50x118x35 mm

KNX Panel 4-fold – 4 buttons with selectable functions: light on/off/toggle/dimming, shutters/ louvers, value setting, scene recall and programming (8Bit), 2 status LEDs – integrated bus coupler. Size: 50x75x35 mm

The MDT Presence Detector is available in several versions, Presence Detector with light sensor and Presence Detector with light sensor plus constant level light intensity. The Presence Detectors captures the smallest movements with 1-4 pyro sensors and h

The MDT Presence Detector is available in several versions, Presence Detector with light sensor and Presence Detector with light sensor plus constant level light intensity. The Presence Detectors captures the smallest movements with 1-4 pyro sensors and h

The Brightness Sensor/Controller with constant level light intensity is suited for ceiling installation in 35mm Kaiser installation box.