Gateways

The Gira X1 was developed specifically for Smart Homes with a KNX network. It enables you to connect a variety of devices and monitor automated processes via app. Minimum effort for maximum comfort.

For single-phase and three-phase counters
Import and export of active power
Current and voltage per phase
Active energy (2 tariffs)

ISE SMART CONNECT KNX REMOTE ACCESS
Secure remote access from anywhere, whether mobile or landline. Unpack, connect and you’re ready to go.
Users and electricians profit from the significant advantages of remote access: Easy set-up and secure remote ins

ISE SMART CONNECT KNX HUE
The Philips Hue lighting system can now also be operated via KNX. Colour value, temperature and brightness can be defined for every light, making each completely customisable.

ISE SMART CONNECT KNX SONOS
Easily control up to ten Sonos master devices, each with up to 5 slaves per master, via KNX. Optionally, each room can be operated separately or, using party mode, the entire house simultaneously.

WEINZIERL 5256 KNX Modbus RTU Gateway
The KNX Modbus RTU Gateway 886 is a compact KNX/Modbus gateway with 250 freely configurable channels (KNX data points). The device allows easy integration of Modbus devices supporting the RTU protocol via RS-485 into

The ISE Smart Connect KNX E-Charge II is a powerful solution for charging electric vehicles. It offers five charging points per device, Dynamic Load Management (DLM), support of different manufacturers, network-supported control.

The KNX IP Interface 731 has a width of only 1 module (18 mm) and is powered by the KNX bus. The device is an interface between IP and KNX and can be used as programming interface for ETS® Software. You can access the KNX Bus from every point of your LAN.

The KNX DMX Gateway 544 is a compact gateway between KNX and DMX512 with up to 64 freely configurable channels. DMX is a protocol for lighting control, especially in stage technology.

xxter KNX controller: Automate & control your home via app. Includes energy management, scenes & location detection. Compact & efficient.

MDT DALI Control PRO64 Gateway: Advanced KNX & DALI-2 support for 64 ECGs/16 groups, HSV/RGB/RGBW color control, web interface for easy commissioning.

KDA-64 KNX-Dali-gateway

KNX bus coupling for counters with M-Bus interface

Make your KNX installation voice-controlled with Pairot! Supports Apple HomeKit, Amazon Alexa & Google Assistant. Easy setup & secure.

Weinzierl KNX ENO 626 Secure
The KNX ENO 626 secure device serves as a bidirectional gateway between EnOcean wireless devices and the KNX bus. With this device, commands and measured values from EnOcean wireless sensors can be transmitted to the KNX bus,

KNX BAOS MODUL 838 KBERRY
Die Weinzierl KNX BAOS Module sind eine leistungsfähige und kostengünstige Lösung für KNX Konnektivität in Form einer kompakten Platine. Sie richten sich vor allem an Hersteller,

KNX-GW2-DMX
The KNX-DMX Gateway is an Interface between the KNX bus and the DMX512 bus.

The KNX IP Interface 732 secure serves as a secure interface between a LAN (IP, Ethernet) and KNX and can be used as a programming interface for the ETS®. As a KNX Secure Interface (tunneling), the device prevents unauthorized access to the system.

ISE SMART APP KNX AXIS
The world's first KNX connection (plug-in) for networking products from the Axis Communications company.
Combine the world of building automation (KNX) with the security technology of the Axis Communications company. Utilise the s

• 2 DALI outputs with DALI-2 certification
• Control capacity for up to 20 DALI-ECGs per DALI output
• DALI output voltage of 19 V, short circuit resistant

Two DALI outputs with DALI-2 certification acc. to IEC 62386-101 and 103, each for communication with up to 64 DALI ballasts

KNX bus coupling for counters with M-Bus interface

KNX/Panasonic TV interface

This interface allows establishing a bidirectional connection between a PC or a laptop and the KNX RF wireless network.
Máx.Longframe APDU: 205

BACnet Application Specific Controller (B-ASC) as Gateway between KNX TP and BACnet IP
Up to 250 BACnet objects
Up to 455 BACnet COV subscriptions

KNX bus coupling for counters with M-Bus interface

3-channel Broadcast DALI Dimming Actuator.
Each channel can control up to 64 DALI Drivers (128 in total).

The KNX PowerSupply DGS 366 is a 640 mA bus power supply with high efficiency and a small footprint of only 4 units (72 mm). The device has a bus choke and additionally provides an output for auxiliary power.

1-channel KNX RF S-Mode Wireless Dimming Actuator for DALI Drivers or Ballasts, with LED or Fluorescence lighting.
Broadcast and uni-directional DALI communication.
Up to 64 DALI ECGs can be controlled.

The ise smart connect KNX Programmable offers the possibility to control third party devices via the IP or USB interface.
64 KNX objects, individual DPT configuration
Programming the application in C # and VB.Net
IP and USB connection with third party

The KNX PowerSupply USB 367 is a 640 mA bus power supply with high efficiency and a small footprint of only 4 units (72 mm). The device has a bus choke, an integrated USB Interface (Micro USB connector)

The KNX TP Push Button 420 secure is a pushbutton insert with integrated bus coupler and mounting kit. The device is available with one or two rockers. Each rocker offers two pressure points (up/down). Artikel 5375 or 5325

The KNX TP Push Button 420 secure is a pushbutton insert with integrated bus coupler and mounting kit. The device is available with one or two rockers. Each rocker offers two pressure points (up/down). Artikel 5325 or 5375

Weinzierl KNX ENO 636 Secure
The KNX ENO 636 secure device serves as a bidirectional gateway between EnOcean wireless devices and the KNX bus. With this device, commands and measured values from EnOcean wireless sensors can be transmitted to the KNX bus,