MDT
The MDT Switch Actuator receives KNX/EIB telegrams and switches up to 12 independent electrical loads.
The MDT Switch Actuator offers current measurement for each channel and measurement of the total current.
The measured data can be transmit in differe
€380,67 Incl. tax
Weather Station Home Outdoor installation on wall or pole, integrated BCU
€374,72 Incl. tax
The MDT KNX Power Supply with integrated choke supplies the KNX Bus with a constant, stabilized 30VDC voltage. The integrated bus coupling unit with diagnostic function monitors the bus voltage, bus current, bus overload and bus voltafe failure/return. Al
€362,85 Incl. tax
The new AKS series offers more channels at less space, so lower costs per channel.
The MDT Switch Actuator receives KNX/EIB telegrams and switches up to 20 independent electrical loads. Each output uses a bistable relay and can be operated manually via a
€362,58 Incl. tax
The MDT Switch Actuator receives KNX/EIB telegrams and switches up to 12 independent electrical loads.
The MDT Switch Actuator offers current measurement for each channel and measurement of the total current.
The measured data can be transmit in differe
€361,00 Incl. tax
KNX IP Router: This Interface offers the same functions as the IP interface, but the device routes telegrams as a line coupler using the the LAN.
€343,92 Incl. tax
The MDT KNX Power Supply with integrated choke supplies the KNX Bus with a constant, stabilized 30VDC voltage. The redundant Bus Power Supply has two integrated power supplies to increase operation reliability. If one mains voltage or one of the internal
€341,27 Incl. tax
The MDT Switch Actuator receives KNX/EIB telegrams and switches up to 12 independent electrical loads. Each output uses a bistable relay, with mechanical manual operation for direct actuation of the relay contact.
€337,41 Incl. tax
The MDT Dimming Actuator receives KNX/EIB telegrams and dimms/switches up to 4 independent electrical loads. Each output can be operated manually via a push button.
€335,05 Incl. tax
The MDT Binary Input is available in 4 versions, input detection of 24VAC/DC signals, input detection of 230VAC signals and inputs fot potential free contacts. The Binary Input reacts depending on its programmed parameters and sends a telegram on the KNX
€331,76 Incl. tax
The MDT Switch Actuator AKK receives KNX/EIB telegrams and switches up to 24 independent electrical loads.
Each output uses a bistable relay.
€317,75 Incl. tax
The MDT Switch Actuator receives KNX/EIB telegrams and switches up to 6 independent electrical loads.
The MDT Switch Actuator offers current measurement for each channel and measurement of the total current. In dependence on the parameterization the me
€313,03 Incl. tax
