Gateways

The Gira X1 offers smart home automation via KNX. Control lighting, temperature, and devices via the Gira Smart Home app, available in the app store. Easy integration with Philips Hue and Sonos.

ISE SMART CONNECT KNX provides secure and easy remote access to your smart home installations. Quick to install and fully supports KNX Secure for optimal data protection.

Control up to 25 Philips Hue lights via KNX with full control over color, brightness, and temperature. Easy to integrate and configurable via ETS for personalized light scenes.

For single-phase and three-phase counters
Import and export of active power
Current and voltage per phase
Active energy (2 tariffs)

Control up to 10 Sonos devices via KNX with dynamic zone creation. Simulate presence, pause music for notifications, and control volume and playlists easily.

The Weinzierl KNX DMX Gateway 544 connects KNX and DMX512, a protocol for lighting control in stage technology, with 64 configurable channels. Supports master and slave mode.

Transform your KNX installation with Pairot into a voice-controlled system. Compatible with Apple HomeKit, Amazon Alexa, and Google Assistant for easy control of lighting and more.

Compact KNX/Modbus RTU gateway with 250 configurable channels. Easily integrates Modbus devices via RS-485 into KNX systems. Works as master or slave.

The xxter controller centralizes home automation via an energy-efficient app. Control lighting, climate, and security with intuitive KNX integration and location detection. App available for iOS and Android.

ISE Smart Connect KNX E-Charge II offers dynamic load management for 5 charging points per device, supporting multiple manufacturers, KNX security, and ETS configuration. Ideal for smart charging integration.

KNX-GW2-DMX
The KNX-DMX Gateway is an Interface between the KNX bus and the DMX512 bus.

Das KNX TP-USB Interface verbindet einen PC mit einem KNX System über USB 2.0 und Busanschluss. Es unterstützt ETS5, benötigt keine zusätzliche Stromversorgung und arbeitet bei -5°C bis 45°C.

KNX IP Interface 732 secure provides secure KNX-to-IP communication, supports ETS® programming, and allows secure access from any LAN point. Powered via KNX bus.

The KNX IP Interface 731 has a width of only 1 module (18 mm) and is powered by the KNX bus. The device is an interface between IP and KNX and can be used as programming interface for ETS® Software. You can access the KNX Bus from every point of your LAN.

The Weinzierl KNX BAOS Module 838 kBerry for Raspberry Pi provides KNX connectivity via a serial port. It supports up to 1000 data points and is configured via ETS software.

KDA-64 KNX-Dali-gateway

The ISE SMART APP KNX-SERIES AXiS integrates Axis network devices with KNX building automation without extra hardware. Supports network cameras, door stations, and speakers.

The KNX PowerSupply DGS 366 is a 640 mA bus power supply with high efficiency and a small footprint of only 4 units (72 mm). The device has a bus choke and additionally provides an output for auxiliary power.

KNX bus coupling for counters with M-Bus interface

BACnet Application Specific Controller (B-ASC) as Gateway between KNX TP and BACnet IP
Up to 250 BACnet objects
Up to 455 BACnet COV subscriptions

The KNX PowerSupply USB 367 is a 640 mA bus power supply with high efficiency and a small footprint of only 4 units (72 mm). The device has a bus choke, an integrated USB Interface (Micro USB connector)

Compact USB interface for bidirectional communication between PC and KNX RF installations, with Longframe Max. APDU length: 205. Works with ETS 5 and powered via USB. Suitable for KNX RF.

Two DALI outputs with DALI-2 certification acc. to IEC 62386-101 and 103, each for communication with up to 64 DALI ballasts