KNX power supplies

AC-DC KNX EIB DIN rail power supply with integrated choke; Output 30Vdc at 640mA; basic function

KNX 640mA power supply with 95-255V AC input. Provides 30V DC on two outputs, one with and one without choke, total 640mA. Short-circuit protection.

For disconnecting the bus line from the power supply. The device has a reset switch for isolating the bus voltage and resetting the bus devices connected to this line. Connection to ABB i-bus® via bus connection terminal.

Compact KNX power supply 1280 mA with diagnostic function and integrated choke. ETS enables status and bus line analysis. Includes extra 30 V DC output, overload and short-circuit protection.

The MDT 640mA KNX/EIB Power Supply with integrated choke provides stabilized 30VDC system voltage for KNX/EIB components. Short-circuit-proof, with overload protection and temperature monitoring.

The MDT KNX Power Supply with integrated choke supplies the KNX Bus with a constant, stabilized 30VDC voltage. The integrated bus coupling unit with diagnostic function monitors the bus voltage, bus current, bus overload and bus voltafe failure/return. Al

The MDT KNX Power Supply with integrated choke supplies the KNX Bus with a constant, stabilized 30VDC voltage. The integrated bus coupling unit with diagnostic function monitors the bus voltage, bus current, bus overload and bus voltafe failure/return. Al

The MDT KNX power supply of 160mA provides 30VDC system voltage with protection against short-circuit, overload, and overheating. Features integrated choke and LED indicators. Ideal for DIN rail installation.

KNX Power supply unit DC 29 V, 640 mA with additional unchoked output, N 125/22

The KNX PowerSupply USB 367 is a 640 mA bus power supply with high efficiency and a small footprint of only 4 units (72 mm). The device has a bus choke, an integrated USB Interface (Micro USB connector)

Compact AC-DC KNX EIB DIN rail power supply with integrated choke. Output: 30Vdc, 1280 mA. Suitable for SELV. Protected against short circuit, overload, and overvoltage. Insulation Class I. LED status indicator.

The MDT 320mA KNX/EIB Power Supply with integrated choke provides stabilized 30VDC for KNX systems. Short-circuit, overload, and over-temperature protection. LED status indicators and easy DIN rail installation.

Redundant KNX Bus Power Supply with dual power for enhanced reliability. 30VDC, 640mA, integrated choke, short-circuit and overload protection, diagnostic functions.

For operation with a KNX power supply without integrated choke or for connection to the unchoked output of the KNX N 125/x2 power supplies
Low-voltage terminal for unchoked voltage and bus
Modular installation devices for mounting on TH35 EN 60715 mount

KNX Power supply unit DC 29 V, 160 mA with additional unchoked output, N 125/02

24 V DC, 300 mA power supply for ISE modules and also door communication, color cameras, bell button lighting, and code keypad systems. Suitable for -5°C to +40°C. IP 20 protection.

For mounting in AP 118 automation module box or AP 641 room control box

The KNX PowerSupply DGS 366 is a 640 mA bus power supply with high efficiency and a small footprint of only 4 units (72 mm). The device has a bus choke and additionally provides an output for auxiliary power.

The MDT KNX Power Supply with integrated choke supplies the KNX Bus with a constant, stabilized 30VDC voltage. The integrated bus coupling unit with diagnostic function monitors the bus voltage, bus current, bus overload and bus voltafe failure/return. Al

640mA power supply for EIB/KNX systems with integrated choke and 30VDC auxiliary output for an additional bus line.

KNX Power supply unit DC 29 V, 320 mA with additional unchoked output, N 125/12

The KNX PowerSupply 365 is a 640 mA bus power supply with high efficiency and a small footprint of only 4 units (72 mm). The device has an integrated bus choke and additionally provides an output for auxiliary power.