IP Interface

KNX IP Interface: The IP Interface enables the communication between the PC and the KNX/EIB system via LAN.
The KNX IP Interface allows to programm the KNX bus via TCP/IP, 4 simultaneous connections possible.

€152,88 Excl. tax
€184,98 Incl. tax
Available
Glass Push Button II Smart 4/6/8/12-fold, + temp sensor White, Colored display and RGB status indicator

The MDT Glass Push Button II Smart releases KNX telegrams after touching the sensor areas on top, 1 or 2 Button operation can be adjusted. The device provides extensive functions like switching of lighting, operation of blinds and shutters, contact type a

€157,30 Excl. tax
€190,33 Incl. tax
Available
Energy Meter EZ with transformer meas.

The MDT energy meter records the actual consumption values in single- or three-phase circuits. Based on the application setting, the values of active / reactive / apparent power, the current / voltage values and the power factor cos phi can be transmitted

€215,80 Excl. tax
€261,12 Incl. tax
Available
Room Temperature Sensor flush mounted, 55mm, white matt or white glossy finish

The MDT Room Temperature Controller is used to control the indoor temperature, it has a working range from -10 to +50°C. The MDT Room Temperature Controller detects the temperature and releases telegrams in dependence on its parameterisation.

Room Temp

€74,10 Excl. tax
€89,66 Incl. tax
Available
Switch actuator AMI with current measurement 12 fold 16/20A C-load 200µF

The MDT Switch Actuator receives KNX/EIB telegrams and switches up to 12 independent electrical loads.
The MDT Switch Actuator offers current measurement for each channel and measurement of the total current.
The measured data can be transmit in differe

€314,60 Excl. tax
€380,67 Incl. tax
Available
24/12 fold Universal Actuator AKU 12SU MDRC, 230VAC, 16A

The MDT Universal Actuator receives KNX/EIB telegrams can be used as Switch Actuator or Shutter Actuator. Mixed applications from Switch- and Shutter Actuators are possible. Each output uses a bistable relay and can be operated manually via button.

€373,10 Excl. tax
€451,45 Incl. tax
Available
Energy Meter EZ with direct measurement

The MDT energy meter records the actual consumption values in single- or three-phase circuits. Based on the application setting, the values of active / reactive / apparent power, the current / voltage values and the power factor cos phi can be transmitted

€148,20 Excl. tax
€179,32 Incl. tax
Available
Weather Station Home

Weather Station Home Outdoor installation on wall or pole, integrated BCU

€294,19 Excl. tax
€355,97 Incl. tax
Available
2/1 fold Universal Actuator 10A Flush mounted AKU-02UP.03

The MDT Universal Actuator with monostable relays can be used as Switch Actuator 2-fold or Shutter Actuator 1-fold and is individually programmable by the ETS. Switching, alarm, central and lock functions are available as well as extensive calibration and

€74,75 Excl. tax
€90,45 Incl. tax
Available
Logic Module

The MDT Logic Module is used for fast and easy compilation of Logic functions to control building automation systems. All the functions are parametrized directly in the ETS without additionally software tools. There are 24 independent function blocks with

€118,56 Excl. tax
€143,46 Incl. tax
Available
1 fold Switch Actuators AKK compact Flush mounted 16A C-last

The MDT Switch Actuator for flush mounting receives KNX / EIB telegrams and switches 1 or 2 independent electrical loads. Each output uses a bistable relay.
Available as 1-way and 2-way actuator

€67,60 Excl. tax
€81,80 Incl. tax
Available
6 fold Switch actuator AZI 16/20A C-Last with active power measurement

The MDT Switch Actuator receives KNX/EIB telegrams and switches up to 6 independent electrical loads.

The MDT Switch Actuator offers current measurement for each channel and measurement of the total current. In dependence on the parameterization the me

€258,70 Excl. tax
€313,03 Incl. tax
Available
KNX RF+ Universal Interface 2-fold Flush mounted, for 230VAC signals

The Universal Interface detects status changes at the inputes and triggers KNX telegrams depending on his parameterizations.

€104,52 Excl. tax
€126,47 Incl. tax
Available
Motion Detector/Automatic Switch

The MDT Motion Detector/Automatic Switch with light sensor captures the smallest movements with its built in pyro detectors and high resolution lens. It is possible to configure 2 separate light channels, one HVA channel and one channel for room monitorin

€86,45 Excl. tax
€104,60 Incl. tax
Available
Glass Push Button II Smart 4/6/8/12-fold, White, Colored display and RGB status indicator

The MDT Glass Push Button II Smart releases KNX telegrams after touching the sensor areas on top, 1 or 2 Button operation can be adjusted. The device provides extensive functions like switching of lighting, operation of blinds and shutters, contact type a

€135,85 Excl. tax
€164,38 Incl. tax
Available
Safety Module

The new MDT security module prevents all connection-oriented accesses of the ETS, such as the programming and also the unloading of the bus devices, in the KNX line. This significantly increases the safety of the protected line in the inner and in the out

€118,56 Excl. tax
€143,46 Incl. tax
Available
IP Router

KNX IP Router: This Interface offers the same functions as the IP interface, but the device routes telegrams as a line coupler using the the LAN.

€246,48 Excl. tax
€298,24 Incl. tax
Available
Shutter Actuator with 4 potential free inputs

The MDT Shutter Actuator with monostable relays is individually programmable by the ETS. Switching, alarm, central and blocking functions are available as well as extensive calibration and positioning functions. In addition to the function as a shutter ac

€80,60 Excl. tax
€97,53 Incl. tax
Available
VisuControl Easy objectserver with iPhone/iPad App 2SU MDRC

The MDT VisuControl Easy object server is used for the visualisation of the current building status and to control building functions via iOS app.

€407,68 Excl. tax
€493,29 Incl. tax
Available
KNX RF+ Switch Actuator 2-fold Flush mounted, 230VAC, 10A

The MDT KNX RF+ Switch Actuator receives KNX/EIB telegrams ans switchs up to 2 indipendent electrical loads.
Each output uses a monostable relay.

€120,90 Excl. tax
€146,29 Incl. tax
Available
KNX RF+ Line Coupler

The MDT KNX RF+ Line Coupler connects MDT KNX RF+ devices to the KNX bus. The Line Coupler offers extensive filter functions to reduce the KNX RF+ bus load.

€204,36 Excl. tax
€247,28 Incl. tax
Available
Push Button Smart 86 4/6/8/12-fold, with temp. sensor White glossy finish

The MDT Push Button Smart 86 releases KNX telegrams after pressing the push buttons on top, 1 or 2 Button operation can be adjusted. The device provides extensive functions like switching of lighting, operation of blinds and shutters, contact type and blo

€144,30 Excl. tax
€174,60 Incl. tax
Available
Room Temperature Controller Smart 55 FM, 55mm, white glossy finish

The MDT Room Temperature Controller Smart with integrated temperature and humidity sensor is used for indoor room temperature regulation. Switch Acuators/Heating Actuators with electrothermic valves or motorized KNX actuators can be controlled by the Room

€119,34 Excl. tax
€144,40 Incl. tax
Available
12 fold Switch actuator 8SU AKS Standard 16A C-Load

The new AKS series offers more channels at less space, so lower costs per channel.
The MDT Switch Actuator receives KNX/EIB telegrams and switches up to 20 independent electrical loads. Each output uses a bistable relay and can be operated manually via a

€253,50 Excl. tax
€306,74 Incl. tax
Available
Please accept cookies to help us improve this website Is this OK? Yes No More on cookies »