Leakage sensor for detecting water leakage, with integrated Bus coupler unit.

The KNX IP Interface 740.1 wireless serves as a wireless interface to the KNX bus based on WLAN. The device can be used as a programming interface for the ETS® and is a wireless alternative to USB or wired IP interfaces. The bus access via WIFI allows the

KNX Binary Input - 2 Channel They can be configured as sensors, switches, or potential-free push buttons

For disconnecting the bus line from the power supply. The device has a reset switch for isolating the bus voltage and resetting the bus devices connected to this line. Connection to ABB i-bus® via bus connection terminal.

4 fold Control device 1-10V 4SU MDRC, 10A C-load KNX SECURE

The Gira X1 was developed specifically for Smart Homes with a KNX network. It enables you to connect a variety of devices and monitor automated processes via app. Minimum effort for maximum comfort.

ZMCoup RF 868
KNX Media coupler for the interconnection of KNX TP lines with wireless KNX RF medium (868 MHz). Support for extended frames (APDU 254 bytes).
Frequency transmission will depend on the frequency used in the country where the project takes

Wireless magnetic contact for surface mounting in door or window, which detects and notifies their opening/closing through the KNX RF standard (868 MHz)

Available colours:
Black (Ref. ZRFWDB)
White (Ref. ZRFWDW)
Grey (Ref. ZRFWDG)
Dark brown (Ref.

The measuring system SK08-BFT-WMT records the soil moisture and the soil temperature, which is measured with the Watermark® sensor. The measured values can be output and used for control tasks.

The measuring system SK08-BFT-WMT records the soil moisture and the soil temperature, which is measured with the Watermark® sensor. The measured values can be output and used for control tasks.

ISE SMART CONNECT KNX HUE
The Philips Hue lighting system can now also be operated via KNX. Colour value, temperature and brightness can be defined for every light, making each completely customisable.

For single-phase and three-phase counters
Import and export of active power
Current and voltage per phase
Active energy (2 tariffs)

KNX IP Interface: The IP Interface enables the communication between the PC and the KNX/EIB system via LAN.
The KNX IP Interface allows to programm the KNX bus via TCP/IP, 4 simultaneous connections possible.

The Gira X1 was developed specifically for Smart Homes with a KNX network. It enables you to connect a variety of devices and monitor automated processes via app. Minimum effort for maximum comfort.

ISE SMART CONNECT KNX REMOTE ACCESS
Secure remote access from anywhere, whether mobile or landline. Unpack, connect and you’re ready to go.
Users and electricians profit from the significant advantages of remote access: Easy set-up and secure remote ins

The MDT Glass Push Button II Smart releases KNX telegrams after touching the sensor areas on top, 1 or 2 Button operation can be adjusted. The device provides extensive functions like switching of lighting, operation of blinds and shutters, contact type a

ISE SMART CONNECT KNX SONOS
Easily control up to ten Sonos master devices, each with up to 5 slaves per master, via KNX. Optionally, each room can be operated separately or, using party mode, the entire house simultaneously.

Wireless magnetic contact for surface mounting in door or window, which detects and notifies their opening/closing through the KNX RF standard (868 MHz)

Available colours:
Black (Ref. ZRFWDB)
White (Ref. ZRFWDW)
Grey (Ref. ZRFWDG)
Dark brown (Ref.

For disconnecting the bus line from the power supply. The device has a reset switch for isolating the bus voltage and resetting the bus devices connected to this line. Connection to ABB i-bus® via bus connection terminal.

DLC-02-KN
DALI-2 multi-master application controller; KNX to DALI gateway