Interface

The Gira X1 offers smart home automation via KNX. Control lighting, temperature, and devices via the Gira Smart Home app, available in the app store. Easy integration with Philips Hue and Sonos.

The Weinzierl KNX IP BAOS 777 provides visualization, control, email notifications, and time synchronization for KNX installations. Includes web server and easy configuration via ETS software.

KNX USB Interface Stick 332 provides a fast and reliable connection between PC and KNX bus, supports long telegrams for more efficient downloads, and is ETS-compatible.

MDT IP Interface enables secure KNX bus communication via TCP/IP with 4 simultaneous connections. Supports KNX IP Secure and Data Secure. Powered by KNX bus. Firmware update available.

KNX IP Interface 732 secure provides secure KNX-to-IP communication, supports ETS® programming, and allows secure access from any LAN point. Powered via KNX bus.

Das KNX TP-USB Interface verbindet einen PC mit einem KNX System über USB 2.0 und Busanschluss. Es unterstützt ETS5, benötigt keine zusätzliche Stromversorgung und arbeitet bei -5°C bis 45°C.

The xxter controller centralizes home automation via an energy-efficient app. Control lighting, climate, and security with intuitive KNX integration and location detection. App available for iOS and Android.

Interface for KNX networks, supporting up to 1000 communication objects and 10 simultaneous client connections via BAOS Binary Protocol or JSON Web Services.

KSI-01U
USB interface; galvanic isolated bidirectional access to the KNX bus line; support up to 220 byte APDU

The KNX IP Interface 740.1 wireless provides wireless access to the KNX bus via WIFI. It serves as a programming interface for ETS®, with WPA2 security, working as an access point or client. Power supplied via KNX bus.

The service interface consists of:
OCI702 service interface
USB 2.0 cable (Type A / B)
KNX service cable for Synco™ controllers (RJ45 / RJ45)
KNX service cable for Desigo™ TRA (RJ45 / jack plug 2.5 mm)
KNX service cable (RJ45 / KNX bus terminal)

The KNX USB Interface 312 is a data interface between a PC or laptop and the KNX installation bus. It can be used as a programming interface for ETS® Software Version 3 (or higher) and supports KNX long frames.

The KNX IP Interface 731 has a width of only 1 module (18 mm) and is powered by the KNX bus. The device is an interface between IP and KNX and can be used as programming interface for ETS® Software. You can access the KNX Bus from every point of your LAN.

Serial RS-232 interface for seamless integration of non-KNX devices into KNX networks, supports FT1.2 and BAOS protocol. Easy installation, powered by KNX bus.

Artikel 5238 IP Aktor and Interface
The KNX TP Multi IO 580 (48I/O) is a universal binary interface for building control. It provides 48 I/O lines. Each line can be used as binary input as well as binary output.

KNX IP interface for connection at telegram and data point levels. Supports 250 group objects, 10 simultaneous clients, and protocols like ARP, ICMP, IGMP, UDP/IP, TCP/IP, DHCP, and Auto IP.

KNX RF USB Interface Stick 340 enables bidirectional communication between PC/laptop and KNX RF network. Compatible with ETS 5+, supports KNX Secure programming and cEMI protocol. SDK available.

The KNX PowerSupply USB 367 is a 640 mA bus power supply with high efficiency and a small footprint of only 4 units (72 mm). The device has a bus choke, an integrated USB Interface (Micro USB connector)

The USB Interface enables communication between PC and KNX/EIB system via USB. Galvanically isolated, firmware updatable, compatible with ETS 3/4/5/6. DIN rail installation.

The KNX PowerSupply DGS 366 is a 640 mA bus power supply with high efficiency and a small footprint of only 4 units (72 mm). The device has a bus choke and additionally provides an output for auxiliary power.

Compatible with USB 2.0 and USB 3.0
For isolated access to the bus line over the built-in USB socket (type B)
For connection of a PC for addressing,etc
Support of bus telegrams with up to 64 bytes length