Accessories

Rocker set for KNX WALTZ Touch+ Pad in aluminium. Available in multiple colours. Enables push-button control. Note: rocker set only, base unit must be ordered separately.

KNX EIB bus cable for building automation and MSR. Always offered at the best price; manufacturer may vary depending on availability and delivery time.

The PT 1000 sensor is designed for precise temperature measurements in various applications. Easy to install with cable lengths up to 12 meters, compatible with KNX systems for flexible integration into heating and cooling systems.

KNX bus connector for solid conductors (0.6-0.8 mm²), black/red. Reverse polarity protection, test voltage 4 kV (YCYM) and 2.5 kV (J-Y(St)Y). Compatible with YCYM 2x2x0.8 and J-Y(St)Y 2x2x0.8.

For mounting 1 or 2 Meteodata, LUXOR or LUNA weather stations to a pole or outdoor corner (diameter 48–60 mm).

Metal mounting frame 71 mm for various KNX wall switches, including the OL-U series. Ensures stable and precise installation in 2-module flush boxes.

4-gang push button cover for the iONprime PB KNX push button base unit. Made of metal or high-quality plastic with premium finish and clear button layout. Easy installation thanks to secure click-on mounting.

Metal mounting frames for MDT KNX components. Available in types A, B and D for various switches, sensors and controls. Ensures secure and stable installation in flush-mounted boxes.

Upgrade set for thePrema KNX. Measures CO₂, temperature, humidity and air pressure. With thermostat and 4 binary inputs.

Adapter for installing mini sensors in spotlights (Ø 51 mm). Suitable for PD-C/MD-C 360i/8 and 12 mini. Made of opal-matte PMMA.

6-fold binary input, MIX2 extension module. Max. 2 per base module. Works only with BMG 6 T KNX. Manual control and LED status per channel.

Temperature probes available in epoxy and steel. Accuracy of 0.5°C at 25°C, with IP67 protection and 3m cable. Ideal for various installation conditions and measurement applications.

Luxury FENIX Edition rocker set with 4 left and 2 right buttons for Eelectron OL-U KNX hardware such as SO08A01KNX. Made of super-matte, scratch-resistant FENIX NTM® with soft-touch and click-mounting.

Surface-mount housing for LUXA 103 B KNX and LUXORliving BI360 presence detectors. Available in white, grey, or black. Easy ceiling or wall installation.

Remote controls for KNX detectors: theSenda B with app, theSenda P for service, and theSenda S for user functions and lighting scenes.

Mounting unit for thePrema, thePassa, theRonda, theMova P, PresenceLight 360, compact office, passage and passimo. Strain relief and contact protection. Ø 67.5 mm.

Optional accessory for Tecla, compatible with drywalls 13-18 mm thick. Not suitable for fire-rated walls. Note: Internal temperature probe and sound non-functional.

NTC temperature probe for accurate measurement in KNX installations with a measuring range of −20 °C to +100 °C. Suitable for temperature monitoring and thermostat functions. Supplied exclusively as a set of 4 units (TS01A04ACC).

Cover clip to limit the detection area of theMova P and theRonda P. Supplied in a set of 5 pieces for precise and targeted detection control.

The glass cover frame assortment 55 comes in white and black, fitting 55mm systems like MDT push-buttons. Available in 1-fold, 2-fold, and 3-fold, with dimensions ranging from 92x92mm to 92x234mm.

IP20 cover for wall and ceiling sensors from the ESYLUX 180 series and touch sensors. Includes shutter to limit vertical detection. Available in multiple colours.

User remote for quick and precise sensor setup from the floor, no ladder needed. Ideal for ceiling sensors of the Compact and ATMO series. Includes wall holder.

4-fold C-load switch actuator with current detection. For high lamp loads. MIX2 extension module with current sensing. Connect to suitable KNX base module.

This labeling film is designed for use with MDT Glastaster Plus and Glass LED display. It provides custom options for clear and durable labeling of switches and buttons in smart home installations.