KNX inwall interface with 4 inputs and 2 bistable relay outputs for switching, shutters, scenes and logic functions. Supports NTC temperature sensors, thermostat modules, BLE Beacon and Data Secure.

Advanced KNX MultiSensor with presence, light, temperature, humidity and sound detection. Ideal for energy-efficient climate and lighting control in buildings and hotels.

Universal KNX controller for fan coil units with 0–10 V outputs, relays and digital inputs. Suitable for 2- and 4-pipe systems with PI control, external sensors and energy-saving logic.

KNX-DALI gateway with 2 independent channels controlling up to 128 ECGs (64 per channel). Supports Tunable White (DT-8), scenes, time schedules and fault diagnostics via KNX.

KNX DIN rail actuator with triac and relay outputs and 8 inputs. Suitable for valve, fan coil and switching applications, featuring PI control, logic functions and flexible configuration.

4-channel KNX dimmer with 1–10 V outputs and 4 relays for electronic ballasts. Supports single channel, tunable white, RGB and RGBW, with scenes, logic and energy-saving functions.

NTC temperature probe for accurate measurement in KNX installations with a measuring range of −50 °C to +60 °C. Suitable for temperature monitoring and thermostat functions. Supplied exclusively as a set of 4 units (TS01B04ACC).

NTC temperature probe for accurate measurement in KNX installations with a measuring range of −20 °C to +100 °C. Suitable for temperature monitoring and thermostat functions. Supplied exclusively as a set of 4 units (TS01A04ACC).

KNX DIN rail actuator with 4 triac outputs for electrothermal valves and 4 freely configurable inputs. Supports on/off, PWM and 3-point control, with integrated thermostat modules and logic functions.

The KNX Presence Detector Standard detects presence via PIR sensor and controls lighting based on brightness. Includes 3 digital inputs for KNX functions and logical control.

Unidirectional KNX-DMX gateway for controlling DMX512 devices via KNX. Supports 512 channels, scenes, sequences and easy integration without ETS configuration.

KNX LED dimmer (CV) for LED strips 12–48 V DC with 4 channels in RGB, RGBW or 3+1 mode. Up to 6A per channel, with overtemp, reverse-polarity and overload protection. Includes 16A C-load relay and status LEDs.

8-channel KNX DIN switch actuator with 16A relay outputs for lighting, loads, and shutter or blind control. Includes 8 logic blocks and an integrated KNX communication interface for reliable building automation.

KNX multisensor with LCD display, temperature, humidity and CO₂ sensors, two 2-stage thermostats with PI control and 4 buttons. Includes RGB LED bar and swipe bar. Ideal for room climate control, scenes and building automation.

Universal KNX DIN module with 8 digital inputs for dry contacts. Supports switching, dimming, shutter control, scenes, pulse counting, NTC temperature probes and smart sensors. Suitable for HVAC control and advanced building automation.

Advanced 4.3″ KNX touch panel with glass finish, 96 functions, thermostats, schedules, alarm monitoring, temperature sensor, KNX Data Secure and IP connectivity for smartphone and tablet control.

Metal mounting frame 71 mm for various KNX wall switches, including the OL-U series. Ensures stable and precise installation in 2-module flush boxes.

Switching actuator/I/O with 16 relay outputs 16A/16AX for C-loads and 16 potential-free inputs. Suitable for lighting, HVAC, blinds and fan coils. Supports NTC sensors, logic interlock and up to 2 thermostat modules.

Premium FENIX Edition rocker set with 4 buttons for Eelectron OL-U KNX touch-sensor hardware modules such as SO08A01KNX. Made from super-matte, scratch-resistant FENIX NTM® with a high-end finish and easy mounting.

The Eelectron KNX power supplies PS00D03KNX and PS00E03KNX provide a stable 640 mA bus voltage with integrated choke for reliable communication. Both variants support DIN-rail mounting and differ only in mechanical design.

KNX Universal Module 24 OUTPUTS Plus with 24 relay outputs 16A/16AX for C-loads. Suitable for lighting, HVAC, blinds, 3-point valves, PWM actuators and fan coils. Supports relay grouping, logic interlock and manual control.

Compact KNX IP interface for connecting a PC to the KNX network via LAN. Supports KNXnet/IP, tunneling, KNX Security (AES-128) and up to 8 simultaneous connections. Powered via KNX bus.

Universal KNX dimmer with 4×300W channels, automatic load detection and RC/L (RLC) support. Works with LED, halogen, CFL and transformers. Channels can operate independently or paired (1+2 / 3+4).

KNX Universal Module 16 OUTPUTS Plus with sixteen 16A/16AX relays for C-loads. Suitable for lighting, HVAC, blinds, 3-point valves, PWM actuators and fan coils. Supports logic interlock, grouped relay modes and manual control.