OL-U KNX Multisensor – Regular Version (temp., humidity & CO₂)

180,00 Excl. tax €300,00 Excl. tax
€217,80 Incl. tax 363,00 Incl. tax.
Out of stock, but available
Unit price: €180,00 / Piece
KNX multisensor with LCD display, temperature, humidity and CO₂ sensors, two 2-stage thermostats with PI control and 4 buttons. Includes RGB LED bar and swipe bar. Ideal for room climate control, scenes and building automation. Read more

Specifications

Brand:
eelectron
Article number:
MO04A01KNX-1
EAN:
8054144525631
Availability:
Out of stock, but available
Delivery time:
Dispatched within approximately 8 working days (please note: this is an estimate and depends on availability from the manufacturer; in some cases, it may be dispatched sooner, but it can also take longer).
Due to the holidays, orders may be delayed and pickup is not possible.

Information

Link zur Website von eelectron (Englisch)

OL-U KNX Multisensor – Regular Version

Item number: MO04A01KNX (Variants: -1 / -3 / -4)

Product Description

The OL-U KNX Multisensor Regular Version is a high-quality KNX environmental multisensor designed for wall installation, featuring an LCD display with adjustable backlighting. The device integrates temperature, humidity and CO₂ sensors, as well as two 2-stage thermostats with PI control for heating, cooling, valve control, 6-way valves and 2-/4-pipe fan coil units.

The front side includes a capacitive swipe bar that supports quick swipe, slow swipe, single tap and double tap gestures for controlling KNX functions such as dimming, setpoints, colour values and scenes. A fully configurable RGB LED bar is available for status indication or visualisation of KNX bus values.

The multisensor provides 4 mechanical buttons (4 channels) freely programmable for on/off control, dimming, shading, scenes or other KNX automation functions. It also includes 32 logic blocks to implement logical, threshold-based, conditional or algebraic formulas, including algorithms for dew-point calculation and proportional humidity control.

Technical Data

  • Display: LCD with adjustable backlight
  • Sensors: temperature, humidity, CO₂
  • Thermostats: 2 × 2-stage thermostats with PI controller
  • Control: 4 mechanical buttons (4 channels)
  • Front interface: capacitive swipe bar (quick swipe, slow swipe, tap)
  • Status indication: fully configurable RGB LED bar
  • Logic: 32 logic blocks (logical, threshold, algebraic, conditional)
  • Protocol: KNX TP – supports KNX Data Secure
  • Power supply: via KNX bus (21–32 VDC, max. 30 mA)
  • Mounting: standard flush wall box (2-module or 3-module frames)
  • Device dimensions: 71 × 71 × 25 mm
  • Frame dimensions (not included): 2M 92×92×11 mm, 3M 130×92×11 mm
  • Material: painted plastic (PC-ABS)
  • Protection rating: IP20
  • Environment: indoor, dry areas
  • Operating temperature: −5 °C to +45 °C

Available Variants

  • MO04A01KNX-1 – Painted Plastic White
  • MO04A01KNX-3 – Painted Plastic Black
  • MO04A01KNX-4 – Painted Plastic Helvetia

Accessories (sold separately)

4-Button Keycap Sets – Painted Plastic

  • BKM4PLL-1 – Painted Plastic White Kit 4 Buttons
  • BKM4PLL-3 – Painted Plastic Black Kit 4 Buttons
  • BKM4PLL-4 – Painted Plastic Helvetia Kit 4 Buttons

Cover Frames – Painted Plastic (71 mm)

Available in the same colours as the keycap sets:

  • PO71A01PL-1 – Painted Plastic White Frame 71 mm
  • PO71A01PL-3 – Painted Plastic Black Frame 71 mm
  • PO71A01PL-4 – Painted Plastic Helvetia Frame 71 mm

Mounting Frames – 71 mm

  • FO71A01-2M – Metal Mounting Frame 71 mm

Important Notice

⚠ INSTALLATION WARNING:
If proper separation between SELV (KNX bus) and 230V wiring is not possible, a minimum clearance of 4 mm must be maintained. The device must never be connected to 230V. Installation only by certified KNX installers.

⚠ IMPORTANT:
This multisensor is supplied without keycap set, without cover frame and without mounting frame. All accessories must be ordered separately to allow proper installation and use.

Delivery Contents

  • 1× OL-U KNX Multisensor Regular Version (selected colour)
  • KNX bus connector (black/red)
  • Mounting screws
Please accept cookies to help us improve this website Is this OK? Yes No More on cookies »