Universal Module 4 OUTPUTS Plus 16A/16AX – lighting, blinds & HVAC
€183,92 Incl. tax €327,91 Incl. tax. Out of stock, but available
Specifications
Information
Universal Module 4 OUTPUTS Plus – 16A / 16AX C-load
Article number: BO04F01KNX
The Universal Module 4 OUTPUTS Plus is a powerful KNX switching actuator with four relay outputs (16A/16AX – suitable for C-loads). It enables professional control of lighting, HVAC, blinds, shutters, 3-point valves and fan-coil units. Its flexible configuration makes it suitable for both residential and commercial installations.
Functions & configurations
- 4 outputs for lighting and load control
- 4 PWM channels for valve actuators (solenoid/magnetic valves)
- 2 channels for shutter or blind control
- 2 channels for 3-point valve control (open–stop–close)
- 1 fan-coil actuator (2-pipe system)
- Logical interlocking for combined relays (up to 8 linked relays)
- Supports 2-pipe and 4-pipe HVAC configurations
- Manual operation via front pushbuttons
- Status LED per channel
Technical data
Outputs:
– 16A cos φ 1 – 230 V AC
– 8A cos φ 0.6 – 230 V AC
– 16A / 16AX (140 µF) – suitable for C-loads
– Minimum switching current: 10 mA
– Maximum peak current: 165 A / 20 ms
– Incandescent/halogen lamps: max. 10 A
– Fluorescent lamps (max. 140 µF): max. 3 A (700 W)
– LED drivers / electronic ballasts: max. 6 A (check inrush current)
– Motors / actuators: max. 10 A
Inputs (IN/OUT PLUS models only):
– 4 potential-free inputs (twisted cable up to 30 m)
– Configurable as digital inputs or LED control outputs (LD00A01ACC / LD00A11ACC)
– 4 analogue inputs for NTC temperature sensors (TS00A/B/D01ACC)
– Up to 4 temperature readings on the KNX bus
– Suitable for basic on/off temperature control
HVAC control:
– Supports PWM valve control
– 3-point valve operation (bi-directional)
– 1 fan-coil actuator per module (2-pipe)
– Logical relay combinations for 4-pipe or 3-speed fan-coil control (up to 8 relays)
– Suitable for heating, cooling and air-flow applications
Communication & power:
– KNX bus supply: 21–32 V DC
– Consumption: approx. 10 mA
– KNX TP1 communication interface
– microSD version (BO04F01KNX-SD) for fast recovery programming
Mechanical data:
– Installation: standard rail mounting (EN 60715)
– Dimensions: 4 modules wide
– Enclosure material: PC-ABS
– IP20 protection class (EN 60529)
Available variants – F-Series
The Universal OUTPUTS Plus actuators are available in:
- 4, 8, 12, 16 and 24 output versions
Additionally, IN/OUT PLUS models are available with integrated binary inputs:
- IO04F01KNX – 4 IN / 4 OUT
- IO08F01KNX – 8 IN / 8 OUT
- IO12F01KNX – 12 IN / 12 OUT
- IO16F01KNX – 16 IN / 16 OUT
This makes the F-Series suitable for both pure relay switching and combined applications involving local inputs, sensors and full HVAC control.
Related products
KNX Universal Module 8 OUTPUTS Plus with eight 16A/16AX relay outputs for C-loads. Suitable for lighting, HVAC, blinds, 3-point valves and fan coils. Supports PWM valves, logical interlock and manual operation.
€249,26 Incl. tax
