Universal Module 8 OUTPUTS Plus 16A/16AX – lighting, blinds & HVAC
€249,26 Incl. tax €444,07 Incl. tax. Out of stock, but available
Specifications
Information
Universal Module 8 OUTPUTS Plus – 16A / 16AX C-load
Article number: BO08F01KNX
The Universal Module 8 OUTPUTS Plus is a high-performance KNX switching actuator with eight relay outputs (16A/16AX – suitable for C-loads). It enables professional control of lighting, HVAC, blinds, shutters, 3-point valves and fan-coil units. Its flexible configuration makes it suitable for both residential and commercial installations.
Functions & configurations
- 8 outputs for lighting and load control
- 8 PWM channels for valve actuators (solenoid valves)
- 4 channels for shutter or blind control
- 4 channels for 3-point valve control (open–stop–close)
- 2 fan-coil actuators (2-pipe systems)
- Logical interlock for combining relays (up to 8 linked relays)
- Supports 2-pipe and 4-pipe HVAC configurations
- Manual operation via front pushbuttons
- Status LED for each output channel
Technical data
Outputs:
– 16A cos φ 1 – 230 V AC
– 8A cos φ 0.6 – 230 V AC
– 16A / 16AX (140 µF) – suitable for C-loads
– Minimum switching current: 10 mA
– Maximum peak current: 165 A / 20 ms
– Incandescent/halogen lamps: max. 10 A
– Fluorescent lamps (max. 140 µF): max. 3 A (700 W)
– LED drivers / electronic ballasts: max. 6 A (check inrush current)
– Motors / actuators: max. 10 A
HVAC control:
– Support for PWM valve control
– 3-point valve control (bidirectional)
– Fan-coil control: 2-pipe (2 channels per fan-coil)
– Logical combinations of up to 8 relays for 4-pipe or 3-speed fan-coil units
– Suitable for heating, cooling and air-flow applications
Communication & power supply:
– KNX bus supply: 21–32 V DC
– Consumption: approx. 10 mA
– KNX TP1 communication interface
– microSD version (BO08F01KNX-SD) for quick recovery programming
Mechanical data:
– Mounting: standard DIN-rail (EN 60715)
– Dimensions: 4 modules wide
– Enclosure material: PC-ABS
– Protection rating: IP20 (EN 60529)
Available variants – F-Series
The Universal OUTPUTS Plus actuators are available in:
- 4, 8, 12, 16 and 24 output versions
Also available are IN/OUT PLUS models with integrated binary inputs:
- IO04F01KNX – 4 IN / 4 OUT
- IO08F01KNX – 8 IN / 8 OUT
- IO12F01KNX – 12 IN / 12 OUT
- IO16F01KNX – 16 IN / 16 OUT
This makes the F-Series suitable for both pure relay switching and installations requiring local inputs, sensor integration or full HVAC control.
Related products
Switching actuator/I/O with 4 relay outputs 16A/16AX for C-loads and 4 potential-free inputs. Suitable for lighting, HVAC, blinds and scenes. Supports NTC sensors, thermostat functions and flexible KNX configuration.
€183,92 Incl. tax
