MDT

The MDT Push Button Lite 55 releases KNX telegrams after pressing the buttons, 1 or 2 Button operation can be programmed.
Each button has two RGBW status LEDs. In addition to switching, dimming, shutters or sending values, numerous functions are availabl

The MDT Room Temperature/humidity sensor 55 detects temperature and humidity in indoor rooms, the dew point is calculated automatically. For the sensors the Min./Max values can be set in the paramerization of the device and approbiate actions can be defin

The MDT Binary Input is available in 3 versions, input detection of 24VAC/DC signals, input detection of 230VAC signals and inputs fot potential free contacts. The Binary Input reacts depending on its programmed parameters and sends a telegram on the KNX

The MDT Binary Input is available in 3 versions, input detection of 24VAC/DC signals, input detection of 230VAC signals and inputs fot potential free contacts. The Binary Input reacts depending on its programmed parameters and sends a telegram on the KNX

The MDT LED Controller receives KNX/EIB telegrams and controls 12/24V RGBW LED stripes.

The MDT LED Controller receives KNX/EIB telegrams and controls 12/24V RGBW LED stripes.

The MDT Dimming Actuator receives KNX/EIB telegrams and dimms/switches up to 4 independent electrical loads. Each output can be operated manually via a push button.

The MDT Shutter Actuator receives KNX/EIB telegrams and controls up to 8 independent shutter or sunblind drives.
Each output uses two monostable relays. The MDRC Shutter Actuators can be operated manually via a push button.

The MDT Switch Actuator AKK receives KNX/EIB telegrams and switches up to 24 independent electrical loads.
Each output uses a bistable relay.

The new AKS series offers more channels at less space, so lower costs per channel.
The MDT Switch Actuator receives KNX/EIB telegrams and switches up to 11 independent electrical loads. Each output uses a bistable relay and can be operated manually via a

The MDT Switch Actuator AKK receives KNX/EIB telegrams and switches up to 3 independent electrical loads (AKK-04FC.03 4 loads).
Each output uses a monostable relay and is individually agjustable via ETS. In operation mode as fan coil actuator a 3-step (A

The MDT KNX Power Supply with integrated choke supplies the KNX Bus with a constant, stabilized 30VDC voltage. The redundant Bus Power Supply has two integrated power supplies to increase operation reliability. If one mains voltage or one of the internal

The MDT KNX/EIB Power Supply with integrated choke produces the stabilized KNX system voltage (30VDC) to supply the connected KNX/EIB components. The operating status is indicated via 3 LED.

Smart 86 Switch: 6-button control with color display and temperature sensor. Versatile for smart home functions.

The MDT Heating Actuator receives KNX/EIB telegrams and controls up to independent electrical outputs.
Each channel has its own LED indicator

The MDT KNX RF+ Wireless Switch Actuator receives KNX / EIB telegrams and switches one consumer. The output is switched via a monostable relay

The MDT KNX Push Button Plus releases KNX telegrams after pushing the buttons on top.

The MDT Motion Detector/Automatic Switch with light sensor captures the smallest movements with its built in pyro detectors and high resolution lens. It is possible to configure 2 separate light channels, one HVA channel and one channel for room monitorin

The MDT Presence Detector is available in several versions, Presence Detector with light sensor and Presence Detector with light sensor plus constant level light intensity. The Presence Detectors captures the smallest movements with 1-4 pyro sensors and h

The MDT KNX Push Button releases KNX telegrams after pushing the buttons on top.

The MDT KNX Push Button releases KNX telegrams after pushing the buttons on top.

The MDT Push Button Smart 63 releases KNX telegrams depending on the paramerization after pressing the buttons. The RGBW status LEDs can be controlled with internal or external objects. The LED brightness is controllable via day/night or brightness object

The MDT Push Button Lite 63 releases KNX telegrams depending on the paramerization after pressing the buttons. The push buttons can be programmed for 1 or 2 button operation (BE-TAL63x4.01: 4 single buttons). The RGBW status LEDs can be controlled with in

The MDT Push Button Lite 63 releases KNX telegrams depending on the paramerization after pressing the buttons. The push buttons can be programmed for 1 or 2 button operation (BE-TAL63x4.01: 4 single buttons). The RGBW status LEDs can be controlled with in