MDT
Cable set Touch panel accessory VisuControl 10“/25,6cm
€24,22 Incl. tax
Cable set Touch panel accessory VisuControl 7 "/ 17.7 cm
€24,22 Incl. tax
The MDT Shutter Actuator receives KNX/EIB telegrams and controls up to 8 independent shutter or sunblind drives.
Each output uses two monostable relays. The MDRC Shutter Actuators can be operated manually via a push button.
€81,01 Incl. tax
The MDT Switch Actuator AKK receives KNX/EIB telegrams and switches up to 3 independent electrical loads.
Each output uses relay (AKK-01UP.03: bistable relais, AKK-02/03UP.03: monostable relais).
€73,14 Incl. tax
The MDT Switch Actuator for flush mounting receives KNX / EIB telegrams and switches 1 or 2 independent electrical loads. Each output uses a bistable relay.
Available as 1-way and 2-way actuator
€100,15 Incl. tax
The new AKS series offers more channels at less space, so lower costs per channel.
The MDT Switch Actuator receives KNX/EIB telegrams and switches up to 20 independent electrical loads. Each output uses a bistable relay and can be operated manually via a
€306,74 Incl. tax
The new AKS series offers more channels at less space, so lower costs per channel.
The MDT Switch Actuator receives KNX/EIB telegrams and switches up to 11 independent electrical loads. Each output uses a bistable relay and can be operated manually via a
€290,22 Incl. tax
The MDT KNX Power Supply with integrated choke supplies the KNX Bus with a constant, stabilized 30VDC voltage. The integrated bus coupling unit with diagnostic function monitors the bus voltage, bus current, bus overload and bus voltafe failure/return. Al
€362,85 Incl. tax
The MDT Binary Input is available in 4 versions, input detection of 24VAC/DC signals, input detection of 230VAC signals and inputs fot potential free contacts. The Binary Input reacts depending on its programmed parameters and sends a telegram on the KNX
€331,76 Incl. tax
The MDT Binary Input is available in 3 versions, input detection of 24VAC/DC signals, input detection of 230VAC signals and inputs fot potential free contacts. The Binary Input reacts depending on its programmed parameters and sends a telegram on the KNX
€283,14 Incl. tax
The MDT Binary Input is available in 3 versions, input detection of 24VAC/DC signals, input detection of 230VAC signals and inputs fot potential free contacts. The Binary Input reacts depending on its programmed parameters and sends a telegram on the KNX
€283,14 Incl. tax
The new AKS series offers more channels at less space, so lower costs per channel.
The MDT Switch Actuator receives KNX/EIB telegrams and switches up to 20 independent electrical loads. Each output uses a bistable relay and can be operated manually via a
€362,58 Incl. tax
The MDT Switch Actuator AKK receives KNX/EIB telegrams and switches up to 24 independent electrical loads.
Each output uses a bistable relay.
€317,75 Incl. tax
The MDT Universal Actuator receives KNX/EIB telegrams can be used as Switch Actuator or Shutter Actuator. Mixed applications from Switch- and Shutter Actuators are possible. Each output uses a bistable relay and can be operated manually via button.
€387,04 Incl. tax
The MDT KNX/EIB Power Supply with integrated choke produces the stabilized KNX system voltage (30VDC) to supply the connected KNX/EIB components. The operating status is indicated via 3 LED.
€127,00 Incl. tax
The MDT LED Controller receives KNX/EIB telegrams and controls 12/24V RGBW LED stripes.
€134,02 Incl. tax
The MDT Dimming Actuator receives KNX/EIB telegrams and dimms/switches up to 4 independent electrical loads. Each output can be operated manually via a push button.
€291,15 Incl. tax
The MDT Shutter Actuator receives KNX/EIB telegrams and controls up to 8 independent shutter or sunblind drives.
Each output uses two monostable relays. The MDRC Shutter Actuators can be operated manually via a push button.
€129,77 Incl. tax
The new AKS series offers more channels at less space, so lower costs per channel.
The MDT Switch Actuator receives KNX/EIB telegrams and switches up to 20 independent electrical loads. Each output uses a bistable relay and can be operated manually via a
€175,96 Incl. tax
The MDT Switch Actuator AKK receives KNX/EIB telegrams and switches up to 24 independent electrical loads.
Each output uses a bistable relay.
€121,91 Incl. tax
The MDT Switch Actuator AKK receives KNX/EIB telegrams and switches up to 3 independent electrical loads.
Each output uses relay (AKK-01UP.03: bistable relais, AKK-02/03UP.03: monostable relais).
€81,01 Incl. tax
The MDT Switch Actuator for flush mounting receives KNX / EIB telegrams and switches 1 or 2 independent electrical loads. Each output uses a bistable relay.
Available as 1-way and 2-way actuator
€109,52 Incl. tax
The MDT Temperature Controller is used for all purpose temperature control applications. The temperature is received as an KNX object or directly from the connected PT1000 temperature sensors (Only SCN-RT6AP.01, SCN-RT2UP.01 or SCN-RT4UP.01).
€105,71 Incl. tax
The inputs of the MDT Universal Interface react depending on their programmed parameters and send a telegram on the KNX bus.
You can connect conventional push-buttons or auxiliary contacts (eg door and window contacts) to the device
€44,93 Incl. tax