Sensore and Controllers

Touch control TC5 UP 205/22 black or white
Aluminium and glas housing
Capacitive touch colour display 5", 480 x 854 pixels
LED colour light strip as orientation light, respectively to signal alarms
Integrated room temperature sensor

QMX3.P37-1BSC
Room operator unit KNX with temperature sensor, segmented backlit display, configurable touchkeys, LED display, black

Intuitive KNX control with color display and temperature sensor. Customizable functions for smart home automation.

KNX sensor for temperature, humidity, and VOC with climate control. Mount on air ducts with plastic flange. Measuring range: Temp 0-50°C, Humidity 0-95% r.H, VOC 450-2000 ppm. Plastic housing IP54/65.

MDT CO2/VOC Combo Sensor 55: measures CO2, VOC, temperature, and humidity for air quality control in spaces. Fits standard switch programs.

Weather Station Home Outdoor installation on wall or pole, integrated BCU

The MDT Motion Detector/Automatic Switch with light sensor captures the smallest movements with its built in pyro detectors and high resolution lens. It is possible to configure 2 separate light channels, one HVA channel and one channel for room monitorin

The measuring system SK08-BFT-WMT records the soil moisture and the soil temperature, which is measured with the Watermark® sensor. The measured values can be output and used for control tasks.

The measuring system SK08-BFT-WMT records the soil moisture and the soil temperature, which is measured with the Watermark® sensor. The measured values can be output and used for control tasks.

KNX temperature and humidity sensor for wall mounting with PI controller for heating and cooling, two binary I/O channels, red and blue status LEDs, temperature range: -20 .. +80 °C, humidity range: 0 .. 100 % r.h.

The MDT Glass Push Button II Smart releases KNX telegrams after touching the sensor areas on top, 1 or 2 Button operation can be adjusted. The device provides extensive functions like switching of lighting, operation of blinds and shutters, contact type a

Passive infrared detector for ceiling installation
Horizontal 360° motion detection area
Presence/motion detection up to 64 m² / 400 m² (depending on mounting or room height)

For connection of a modular bus device to the bus line
10-pole BTI socket (BTI - Bus Transceiver Interface) for plugging of bus terminal devices with BTI connector

The MDT Temperature Controller is used for all purpose temperature control applications. The temperature is received as an KNX object or directly from the connected PT1000 temperature sensors (Only SCN-RT6AP.01, SCN-RT2UP.01 or SCN-RT4UP.01).

4-gang Laüka Capacitive Multifunction Pushbutton with Black glass and RGB backlit.
Customizable RGB backlit and lighted icons: Laüka Configurator
Glass touch surface.

Presence and daylight dependent constant light control
KNX functions: Alarm, twilight switch, brightness detection, light-dependent motion detection, snooze function, scene telegram via object

OFFERS SPECIAL PRODUCT FEATURES SUCH AS
Presence and daylight-dependent constant light control
KNX functions: alarm, twilight switch, brightness detection, light-dependent motion detection, snooze function, scene telegram via object

The MDT Glass Push Button II Smart releases KNX telegrams after touching the sensor areas on top, 1 or 2 Button operation can be adjusted. The device provides extensive functions like switching of lighting, operation of blinds and shutters, contact type a

PT 1000 Sensor standard
Dimensions 4mm x 30mm, cable length 1m

The MDT Room Temperature Controller Smart with integrated temperature and humidity sensor is used for indoor room temperature regulation. Switch Acuators/Heating Actuators with electrothermic valves or motorized KNX actuators can be controlled by the Room

6-gang LaükaDot Capacitive Multifunction Pushbutton with White glass and Chrome colour frame.
Glass touch surface.
Lighted, but non-customizable, icons.

Passive infrared detector for ceiling mounting indoors
Adjustable sensitivity of detection
Mixed light measurement

Ultrasound for reliable detection for ceiling installation indoors even behind objects
Additional detection options through PIR technology
Horizontal 360° motion detection area

MDT Energy Meter EZ: 3-phase power meter for both consumption and generation, includes 3 current transformers, suitable for industrial use, with RMS current measurement.