KNX RF

Wireless magnetic contact for surface mounting in door or window, which detects and notifies their opening/closing through the KNX RF standard (868 MHz)

Available colours:
Black (Ref. ZRFWDB)
White (Ref. ZRFWDW)
Grey (Ref. ZRFWDG)
Dark brown (Ref.

ZMCoup RF 868
KNX Media coupler for the interconnection of KNX TP lines with wireless KNX RF medium (868 MHz). Support for extended frames (APDU 254 bytes).
Frequency transmission will depend on the frequency used in the country where the project takes

The MDT KNX RF+ Line Coupler connects MDT KNX RF+ devices to the KNX bus. The Line Coupler offers extensive filter functions to reduce the KNX RF+ bus load.

The MDT KNX RF+ Switch Actuator receives KNX/EIB telegrams ans switchs up to 2 indipendent electrical loads.
Each output uses a monostable relay.

The MDT KNX RF+ Glas Push Button Plus releases KNX telegrams after touching the sensor areas on top, 1 or 2 button operation can be parameterized.

The MDT KNX RF+ Socket receives KNX/EIB telegrams and switches one electrical load.

The MDT KNX RF+ Shutter Actuator receives KNX/EIB telegrams and controls 1 indipendent shutter or sunblind drive.
The output uses two monostable relays.

The MDT KNX RF+ Socket receives KNX/EIB telegrams and switches one electrical load.

The KNX RF / ENO Push Button 440 secure unites two wireless protocols in one device: EnOcean and KNX RF. Out of the box the push button operates in EnOcean mode.

The MDT KNX RF+ Glas Push Button Plus releases KNX telegrams after touching the sensor areas on top, 1 or 2 button operation can be parameterized.

The MDT KNX Push Button Plus releases KNX telegrams after pushing the buttons on top.

This interface allows establishing a bidirectional connection between a PC or a laptop and the KNX RF wireless network. The device complies with the specification of KNX RF and supports the protocol cEMI.

The KNX TP Push Button 420 secure is a pushbutton insert with integrated bus coupler and mounting kit. The device is available with one or two rockers. Each rocker offers two pressure points (up/down). Artikel 5325 or 5375

The KNX RF / ENO Push Button 440 secure unites two wireless protocols in one device: EnOcean and KNX RF. Out of the box the push button operates in EnOcean mode.

The MDT KNX Push Button Plus releases KNX telegrams after pushing the buttons on top.

The MDT KNX Push Button Plus releases KNX telegrams after pushing the buttons on top.

The MDT KNX RF+ Switch Actuator receives KNX/EIB telegrams ans switchs up to 2 indipendent electrical loads.
Each output uses a monostable relay.

The Universal Interface detects status changes at the inputes and triggers KNX telegrams depending on his parameterizations.

The MDT KNX Push Button Plus releases KNX telegrams after pushing the buttons on top.