Switch Actuators

Analog In-/Output 2-fold
Flush mounted, input voltage 0-12V/2-10V
or current loop 0-20mA/4-20mA
output voltage 0-10V

4 fold Control device 1-10V 4SU MDRC, 10A C-load KNX SECURE

Article 5267 Universal 48 channels input/output
The KNX TP Multi IO 570 (48I/O) is a universal binary interface for building control. It provides 48 I/O lines. Each line can be used as binary input as well as binary output.

8-way switch actuator 10A per channel, 4 MDRC

The MDT Switch Actuator receives KNX/EIB telegrams and switches up to 12 independent electrical loads.
The MDT Switch Actuator offers current measurement for each channel and measurement of the total current.
The measured data can be transmit in differe

The MDT Switch Actuator AKK receives KNX/EIB telegrams and switches up to 24 independent electrical loads.
Each output uses a bistable relay.

8 slots for a sensor/actuator module, type RS or RL
Internal bus cable for connection of the sensor/actuator module to the bus

One relay contact per output
Rated contact operating voltage: AC 230 V
Rated contact frequency: 50/60 Hz
Rated contact current: 16 A

The KNX IO 546.1 secure (1D1O) is a compact combined dimming/switching actuator with 1 dimming output for active electronic ballasts with a 0/1-10V interface and 1 bi-stable relay output.

The new AKS series offers more channels at less space, so lower costs per channel.
The MDT Switch Actuator receives KNX/EIB telegrams and switches up to 20 independent electrical loads. Each output uses a bistable relay and can be operated manually via a

The MDT Switch Actuator receives KNX/EIB telegrams and switches up to 12 independent electrical loads.
The MDT Switch Actuator offers current measurement for each channel and measurement of the total current.
The measured data can be transmit in differe

Analog In-/Output 4-fold

2SU MDRC mounted, input voltage 0-12V/2-10V
or current loop 0-20mA/4-20mA
output voltage 0-10V

Rated contact current according to DIN EN 60669: 16 AX / 20 AX (200 µF fluorescent lamp load)

Artikel 5238 IP Aktor and Interface
The KNX TP Multi IO 580 (48I/O) is a universal binary interface for building control. It provides 48 I/O lines. Each line can be used as binary input as well as binary output.

The new AKS series offers more channels at less space, so lower costs per channel.
The MDT Switch Actuator receives KNX/EIB telegrams and switches up to 20 independent electrical loads. Each output uses a bistable relay and can be operated manually via a

Multifunction actuator that can function as a regulator for RGBW LED strips with 4 input and output channels:
· Switching of 4 independent output channels
· Blinds/Awnings Actuator with 2 output channels
· 1 Fan-Coil Actuator with 2 tubes

KNX Multifunction Actuator that can work as: 16-channel Switching Actuator or 8-channel Blinds/Shutters Actuator.
Incorporate 23 Inputs: 16-Binary Inputs + 7-Binary/Analog Inputs.

Rated contact current 10 AX

The MDT Switch Actuator for flush mounting receives KNX / EIB telegrams and switches 1 or 2 independent electrical loads. Each output uses a bistable relay.
Available as 1-way and 2-way actuator

2-channel Switching Actuator or 1-channel Blinds / Awnings Actuator.
Maximum switching capacity of up to 16A per channel, 2 voltage-free contacts.

DIN rail mounted device for mounting on rail TH35 according to DIN EN 60715

3 floating relay contact
One relay contact per output as switching element
Contact rated current according to DIN EN 60669-1: 6 A (resistive load)

Rated contact frequency: 50/60 Hz
2 floating relay contacts
Contact rated current according to DIN EN 60669-1: 10 A (resistive load)

The KNX IO 511.1 secure (1O2I) is a compact switching actuator with 1 bi-stable output and 2 binary inputs. The actuator provides the function for universal outputs including scene control, timer, staircase lighting and heating valves