KNX Choke

For disconnecting the bus line from the power supply. The device has a reset switch for isolating the bus voltage and resetting the bus devices connected to this line. Connection to ABB i-bus® via bus connection terminal.

€41,30 Excl. tax
€49,97 Incl. tax
Available
1280mA Bus Power Supply with +30Vdc diagnostic function 4SU MDRC

Compact power supply 1280 mA with integrated choke. Rapid diagnosis ETS communication objects. Operational status and bus line analysis possible by means ETS. Extra voltage output for feeding an extra line in combination with an extra choke.

€238,95 Excl. tax
€289,13 Incl. tax
Available
WEINZIERL 5335 KNX Powersupply 640mA

The KNX PowerSupply 365 is a 640 mA bus power supply with high efficiency and a small footprint of only 4 units (72 mm). The device has an integrated bus choke and additionally provides an output for auxiliary power.

€151,14 Excl. tax
€182,88 Incl. tax
Available
640 mA Bus Power Supply +30Vdc 3SU MDRC

AC-DC KNX EIB DIN rail power supply with integrated choke; Output 30Vdc at 640mA; basic function

€72,50 Excl. tax
€87,73 Incl. tax
Available
640mA Bus Power Supply with diagnostic function 4SU MDRC

The MDT KNX Power Supply with integrated choke supplies the KNX Bus with a constant, stabilized 30VDC voltage. The integrated bus coupling unit with diagnostic function monitors the bus voltage, bus current, bus overload and bus voltafe failure/return. Al

€202,80 Excl. tax
€245,39 Incl. tax
Available
KNX Choke 640mA N120/02

For operation with a KNX power supply without integrated choke or for connection to the unchoked output of the KNX N 125/x2 power supplies
Low-voltage terminal for unchoked voltage and bus
Modular installation devices for mounting on TH35 EN 60715 mount

€49,35 Excl. tax
€59,71 Incl. tax
Not available
Siemens Power supply unit DC 29 V, 640 mA with additional unchoked output, N 125/22

KNX Power supply unit DC 29 V, 640 mA with additional unchoked output, N 125/22

€198,64 Excl. tax
€240,35 Incl. tax
Available
WEINZIERL 5219 KNX Powersupply 640mA with USB

The KNX PowerSupply USB 367 is a 640 mA bus power supply with high efficiency and a small footprint of only 4 units (72 mm). The device has a bus choke, an integrated USB Interface (Micro USB connector)

€257,28 Excl. tax
€311,31 Incl. tax
Available
Siemens Power supply unit DC 29 V, 320 mA with additional unchoked output, N 125/12

KNX Power supply unit DC 29 V, 320 mA with additional unchoked output, N 125/12

€144,04 Excl. tax
€174,29 Incl. tax
Available
Siemens Power supply unit DC 29 V, 160 mA with additional unchoked output, N 125/02

KNX Power supply unit DC 29 V, 160 mA with additional unchoked output, N 125/02

€103,48 Excl. tax
€125,21 Incl. tax
Available
640mA KNX/EIB Power Supply with integrated choke 4SU MDRC

The MDT KNX/EIB Power Supply with integrated choke produces the stabilized KNX system voltage (30VDC) to supply the connected KNX/EIB components. The operating status is indicated via 3 LED.

€161,20 Excl. tax
€195,05 Incl. tax
Available
320mA KNX/EIB Power Supply with integrated choke 2SU MDRC

The MDT KNX/EIB Power Supply with integrated choke produces the stabilized KNX system voltage (30VDC) to supply the connected KNX/EIB components. The operating status is indicated via 3 LED.

€118,30 Excl. tax
€143,14 Incl. tax
Available
Siemens Decentralized power supply, 80 mA, AC 230 V - RL 125/23

For mounting in AP 118 automation module box or AP 641 room control box

€57,78 Excl. tax
€69,91 Incl. tax
Available
Powersupply DC 24 V 300 mA

Technische gegevens
Nominale spanning
- primair: AC 230 V, 50 Hz
Nominale spanning secundair
- secundair: DC 24 V SELV
Nominale stroom secundair: 0,3 A
Zekering: Zwakstroomzekering 250 V, 160 mA
Omgevingstemperatuur: -5 °C tot +40 °C
Afmetingen
M

€68,59 Excl. tax
€82,99 Incl. tax
Available
Redundant Bus Power Supply with diagnostic function

The MDT KNX Power Supply with integrated choke supplies the KNX Bus with a constant, stabilized 30VDC voltage. The redundant Bus Power Supply has two integrated power supplies to increase operation reliability. If one mains voltage or one of the internal

€282,04 Excl. tax
€341,27 Incl. tax
Available
160mA KNX/EIB Power Supply with integrated choke 2SU MDRC

The MDT KNX/EIB Power Supply with integrated choke produces the stabilized KNX system voltage (30VDC) to supply the connected KNX/EIB components. The operating status is indicated via 3 LED.

€104,96 Excl. tax
€127,00 Incl. tax
Available
Dinuy FA KNT 001 KNX Power supply 640mA with auxiliary output

Dinuy FA KNT 001 KNX Power supply 640mA with auxiliary output

€194,88 Excl. tax
€235,80 Incl. tax
Available
WEINZIERL 5207 KNX Powersupply 640mA with Logica

The KNX PowerSupply DGS 366 is a 640 mA bus power supply with high efficiency and a small footprint of only 4 units (72 mm). The device has a bus choke and additionally provides an output for auxiliary power.

€229,20 Excl. tax
€277,33 Incl. tax
Available
1280mA Bus Power Supply +30Vdc 4SU MDRC

AC-DC KNX EIB DIN rail power supply with integrated choke; Output 30Vdc at 1.280mA; basic function

€139,41 Excl. tax
€168,69 Incl. tax
Available
1280mA Bus Power Supply with diagnostic function 6SU MDRC

The MDT KNX Power Supply with integrated choke supplies the KNX Bus with a constant, stabilized 30VDC voltage. The integrated bus coupling unit with diagnostic function monitors the bus voltage, bus current, bus overload and bus voltafe failure/return. Al

€299,88 Excl. tax
€362,85 Incl. tax
Available
960mA Bus Power Supply with diagnostic function 6SU MDRC

The MDT KNX Power Supply with integrated choke supplies the KNX Bus with a constant, stabilized 30VDC voltage. The integrated bus coupling unit with diagnostic function monitors the bus voltage, bus current, bus overload and bus voltafe failure/return. Al

€235,30 Excl. tax
€284,71 Incl. tax
Available
Please accept cookies to help us improve this website Is this OK? Yes No More on cookies »