KNX RF sensoren

Wireless magnetic contact for surface mounting in door or window, which detects and notifies their opening/closing through the KNX RF standard (868 MHz)

Available colours:
Black (Ref. ZRFWDB)
White (Ref. ZRFWDW)
Grey (Ref. ZRFWDG)
Dark brown (Ref.

The MDT KNX Push Button Plus releases KNX telegrams after pushing the buttons on top.

The Universal Interface detects status changes at the inputes and triggers KNX telegrams depending on his parameterizations.

The KNX RF / ENO Push Button 440 secure unites two wireless protocols in one device: EnOcean and KNX RF. Out of the box the push button operates in EnOcean mode.

The MDT KNX RF+ Glas Push Button Plus releases KNX telegrams after touching the sensor areas on top, 1 or 2 button operation can be parameterized.

KNX-RF wireless temperature, luminosity & humidity multi-sensor

The KNX RF / ENO Push Button 440 secure unites two wireless protocols in one device: EnOcean and KNX RF. Out of the box the push button operates in EnOcean mode.

The MDT KNX RF+ Switch Actuator receives KNX/EIB telegrams ans switchs up to 2 indipendent electrical loads.
Each output uses a monostable relay.

The MDT KNX Push Button Plus releases KNX telegrams after pushing the buttons on top.

Wireless KNX RF S-Mode Temperature and Relative Humidity Sensor.
The communication with the bus must be done by using a KNX/KNX RF S-Mode media coupler.

Wireless door/window contact sensor KNX-RF S-Mode for detecting the state (closed/open) of a door or window over the reed contact integrated in the device.
Battery-operated: 2 batteries x 3V CR2032. Useful life highr than 12 years.

The MDT KNX Push Button Plus releases KNX telegrams after pushing the buttons on top.

The MDT KNX Push Button Plus releases KNX telegrams after pushing the buttons on top.

Remote control for lighting and shutters/blinds control.
Five different channels and five different scenes.

Wireless KNX-RF Motion Detectors, with Infrared detection technology, for recessed mounting in a false ceiling, powered by battery.
It has a highly sensitive PIR sensor, which, together with the lens design,

RF-KNX compatible transmitter for general purpose which emulates the working mode of the channel code 0311h.
1 output channel.

Wireless KNX-RF S-Mode Pushbutton Interface which allows the control of Switching, Dimming or Blinds Actuators.
Incorporates 2 inputs, each of which can be parameterized individually through the ETS:
Control of 1 or 2 independent output channels.

3-channel KNX-RF S-Mode Wireless Dimming Actuator for RGB LED Strips.
Control of RGB or Single-colored LED Strips via Pulse Width Modulation (PWM).

It has 4 Analog/Digital inputs, which can be configured independently, through the ETS:

The MDT KNX RF+ Glas Push Button Plus releases KNX telegrams after touching the sensor areas on top, 1 or 2 button operation can be parameterized.