DINUY RE.K5X.RGB Wireless KNX-RF S-Mode dimmer for RGB LED Strips
€106,63 Excl. tax
€189,56 Excl. tax
€129,02 Incl. tax €229,37 Incl. tax. In stock (1)
€129,02 Incl. tax €229,37 Incl. tax. In stock (1)
3-channel KNX-RF S-Mode Wireless Dimming Actuator for RGB LED Strips.
Control of RGB or Single-colored LED Strips via Pulse Width Modulation (PWM).
It has 4 Analog/Digital inputs, which can be configured independently, through the ETS: Read more
Specifications
Brand:
Dinuy
Article number:
RE K5X RGB
EAN:
8422447017021
Availability:
In stock (1)
Delivery time:
1-3 working days
Information
Description:
3-channel KNX-RF S-Mode Wireless Dimming Actuator for RGB LED Strips. Control of RGB or Single-colored LED Strips via Pulse Width Modulation (PWM). Different functions are configurable via ETS, e.g.: · Control of 1 RGB LED Strip or 3 Single-colored LED Strips. · Soft Switch On and Off. · Minimum and maximum dimming level. Staircase time switch with pre-warning function. Up to 5 Scenes and 5 Sequences can be stored / called up. It has 4 Analog/Digital inputs, which can be configured independently, through the ETS: Digital inputs (binary): allows the connection of a pushbutton, switch or conventional binary sensor, free-voltage contact. Analog inputs: allows the connection of a temperature probe (ST KNT 001 or ST KNT 002). Each of the four inputs has the following functions: Switch, Dimmer, Multiple Dimmer, Sequential Switch, Blind Control, Scene Control, Fixed/Forced Function, Counter, Temperature Sensor and RGB colours. In addition, it allows to enable and configure up to 4 independent Thermostats. Programming and commissioning via ETS5 or later version.
Technical characteristics RE K5X RGB
| Product reference | RE K5X RGB |
| Power Supply (V) | 12Vcc - 48Vcc |
| Consumption | < 12mA |
| Output channels | 3 |
| Switching capacity (A) | 5 |
| Type of load | LED strips |
| Maximum load LED Strip | 5A (per channel) |
| Halogen lamps with ferromagnetic trafo (W | 0 |
| Motores (VA) | 0 |
| Maximum current input 1/10VDC (mA) | 0 |
| Maximum Number of Equipments | 0 |
| Binary/Analogic Inputs | 4 |
| Installation | Surface Ceiling |
| Module number | 0 |
| Control | KNX-RF |
| Programming by | ETS5 or higher |
| Compatible with | KNX-RF System Mode |
| Radiofrequency | 868,3MHz |
| Maximum coverage (m) | 100 |
| Connection terminals | Captive Screws |
| Cable section (mm2) | 2.5 |
| Minimum Storage Temperature (ºC) (min) | -30 |
| Maximum Storage Temperature (ºC) (max) | 70 |
| Minimum Working Temperature (ºC) (min) | 0 |
| Maximum Working Temperature (ºC) (max) | 40 |
| Protection Degree | IP20 , UNE 20324 |
