MDT

The MDT Switch Actuator AKK receives KNX/EIB telegrams and switches up to 24 independent electrical loads.
Each output uses a bistable relay.

The MDT Heating Actuator receives KNX/EIB telegrams and controls up to independent electrical outputs.
Each channel has its own LED indicator

The MDT KNX Power Supply with integrated choke supplies the KNX Bus with a constant, stabilized 30VDC voltage. The integrated bus coupling unit with diagnostic function monitors the bus voltage, bus current, bus overload and bus voltafe failure/return. Al

Analog In-/Output 2-fold
Flush mounted, input voltage 0-12V/2-10V
or current loop 0-20mA/4-20mA
output voltage 0-10V

Analog In-/Output 4-fold

2SU MDRC mounted, input voltage 0-12V/2-10V
or current loop 0-20mA/4-20mA
output voltage 0-10V

The Brightness Sensor/Controller with constant level light intensity is suited for ceiling installation in 35mm Kaiser installation box.

The Central Operation Unit Smart 86 combines a large number of functions in one device and serves as a central
control unit for your Smart Home. The integrated astronomical timer moves the blinds up in the morning automatically and down again after sunse

MDT CO2/VOC Combo Sensor 55: measures CO2, VOC, temperature, and humidity for air quality control in spaces. Fits standard switch programs.

The MDT VisuControl Touch Panel is used for the visualisation of the current building status and to control building functions.

The MDT VisuControl Touch Panel is used for the visualisation of the current building status and to control building functions.

MDT DALI Control PRO64 Gateway: Advanced KNX & DALI-2 support for 64 ECGs/16 groups, HSV/RGB/RGBW color control, web interface for easy commissioning.

Efficient MDT Energy Meter EZ for industry: measures energy consumption and production, suitable for 1- or 3-phase circuits, with integrated current measurement and true RMS.

MDT Energy Meter EZ: 3-phase power meter for both consumption and generation, includes 3 current transformers, suitable for industrial use, with RMS current measurement.

The MDT VisuControl Touch Panel is used for the visualisation of the current building status and to control building functions.

The MDT VisuControl Touch Panel is used for the visualisation of the current building status and to control building functions.

The MDT VisuControl Touch Panel is used for the visualisation of the current building status and to control building functions.

The MDT VisuControl Touch Panel is used for the visualisation of the current building status and to control building functions.

The MDT Presence Detector is available in several versions, Presence Detector with light sensor and Presence Detector with light sensor plus constant level light intensity. The Presence Detectors captures the smallest movements with 1-4 pyro sensors and h

The MDT Presence Detector is available in several versions, Presence Detector with light sensor and Presence Detector with light sensor plus constant level light intensity. The Presence Detectors captures the smallest movements with 1-4 pyro sensors and h

Depending on its parameterization the MDT Glass Push Button II Lite releases KNX telegrams. The sensor areas can be programmed for 1 or 2 button operation (BE-GTL4xx.01: 4 single sensor buttons). The RGBW status LEDs can be controlled with internal or ext

Depending on its parameterization the MDT Glass Push Button II Lite releases KNX telegrams. The sensor areas can be programmed for 1 or 2 button operation (BE-GTL4xx.01: 4 single sensor buttons). The RGBW status LEDs can be controlled with internal or ext

Depending on its parameterization the MDT Glass Push Button II Lite releases KNX telegrams. The sensor areas can be programmed for 1 or 2 button operation (BE-GTL4xx.01: 4 single sensor buttons). The RGBW status LEDs can be controlled with internal or ext

Depending on its parameterization the MDT Glass Push Button II Lite releases KNX telegrams. The sensor areas can be programmed for 1 or 2 button operation (BE-GTL4xx.01: 4 single sensor buttons). The RGBW status LEDs can be controlled with internal or ext

Depending on its parameterization the MDT Glass Push Button II Lite releases KNX telegrams. The sensor areas can be programmed for 1 or 2 button operation (BE-GTL4xx.01: 4 single sensor buttons). The RGBW status LEDs can be controlled with internal or ext