Gateways

This gateway provides seamless communication between KNX and BACnet networks, supports 250 BACnet objects, 455 COV subscriptions, and KNXnet/IP tunneling. Ideal for visualization and remote access via Ethernet.

Integrate up to four Panasonic TVs into your KNX Smart Home. Control the device, receive notifications, and optimize your entertainment experience, fully configurable via ETS.

The KNX USB Interface 2.0 connects your PC to the KNX system via USB. Requires no extra power, supports ETS5+ and long frame telegrams up to 55 bytes. Efficient communication.

1-way DALI actuator with KNX Data Secure supports RGB, RGBW, Tunable White and DT8 luminaires, and includes 2 binary inputs, integrated temperature monitoring and a compact flush-mounted module. Easy commissioning for up to 30 ECGs in broadcast mode.

Dimmable KNX-RF actuator for DALI drivers, perfect for wireless installation upgrades. Includes scenes, adjustable dimming levels, soft on/off functions, and emergency behavior.

KNX-DALI interface with 2 channels for DIN rail. Supports up to 64 ballasts per channel. Compatible with DT1/DT8, includes display, error detection, and ETS DCA.

KNX-DALI interface for flush mounting, supports 16 ballasts and 16 groups. One channel, no external power required. Supports DALI-2, KNX Secure.

KNX interface for 4 consumption meters with S0 pulse outputs. Measures electricity, water, and gas consumption. Battery buffering for power failure and LED indicators.

KNX IP Interface 732 secure provides secure KNX-to-IP communication, supports ETS® programming, and allows secure access from any LAN point. Powered via KNX bus.

Gateway between KNX and DMX512 bus for controlling 512 channels, 64 scenes and 16 sequences. DIN rail mounting (6TE), galvanically isolated.

Gateway for bidirectional control of Mitsubishi Ecodan hydroboxes via KNX, with 2 analog/digital inputs for sensors or switches and 10 logical functions.

ISE Smart Connect KNX E-Charge II offers dynamic load management for 5 charging points per device, supporting multiple manufacturers, KNX security, and ETS configuration. Ideal for smart charging integration.

Compact KNX/Modbus RTU gateway with 250 configurable channels. Easily integrates Modbus devices via RS-485 into KNX systems. Works as master or slave.

DALI-2 certified gateway with 1 channel for 64 DALI luminaires. (16) groups, (16) scenes, effects, color control (DT8). Easy setup and ballast replacement via ETS DCA.

Compact KNX IR controller for A/C units and devices. Manages over 300 models via IR codes. Includes IR emitter and KNX integration. Installs in wall or distribution boxes.

The DALI Control 64 Gateway interfaces between KNX and DALI for switching, dimming, and color control of DALI lights. Supports DALI DT6/DT8, RGB, Tunable White, and more with two DALI outputs.

The ISE SMART APP KNX-SERIES AXiS integrates Axis network devices with KNX building automation without extra hardware. Supports network cameras, door stations, and speakers.

Multimaster DALI-2 gateway with 1 channel for 64 devices, KNX Data Secure, DALI-2 sensors, push buttons, DT8 color control, scenes, MQTT and ETS DCA.

DIN rail gateway connecting KNX to up to 3 M-Bus devices. Supports 32 freely assignable data points. Includes integrated bus coupler.

KNX/DALI gateway with 1 channel for DALI1/DALI2 lighting, sensors, and emergency lights. Supports Multi-Master operation and constant light control via DALI-2.

This wireless KNX RF USB interface allows easy management of KNX installations. Ideal for commissioning and troubleshooting via ETS, compatible with KNX RF Multi and Ready.

Gateway for KNX integration with Fujitsu, General, Hiyasu, and Fuji Electric AC units. Bidirectional communication via CN65 connector, 2 analog/digital inputs, and KNX Secure support. Compact design for installation in junction or wall boxes.

KNX-DALI interface with 6 channels, each for up to 64 ballasts. Supports color control (DT8), 20 scenes/sequences, error detection, and manual control.