MDT
KNX IP Router: This Interface offers the same functions as the IP interface, but the device routes telegrams as a line coupler using the the LAN.
€343,92 Incl. tax
KNX IP Interface: The IP Interface enables the communication between the PC and the KNX/EIB system via LAN.
The KNX IP Interface allows to programm the KNX bus via TCP/IP, 4 simultaneous connections possible.
€213,54 Incl. tax
This Interface connects two KNX lines to each other. Electrical isolation between the lines and reduction of the busload by using the filter function.
€248,45 Incl. tax
The USB Interface enables the communication between the PC and the KNX/EIB system. The USB interface is galvanically isolated from the KNX/EIB bus.
€172,47 Incl. tax
The MDT Shutter Actuator with monostable relays is individually programmable by the ETS. Switching, alarm, central and blocking functions are available as well as extensive calibration and positioning functions. In addition to the function as a shutter ac
€109,72 Incl. tax
The MDT LED Controller receives KNX/EIB telegrams and controls 12/24V RGBW LED stripes.
€173,54 Incl. tax
The MDT Dimming Actuator receives KNX/EIB telegrams and dimms/switches up to 4 independent electrical loads. Each output can be operated manually via a push button.
€291,15 Incl. tax
The MDT KNX Power Supply with integrated choke supplies the KNX Bus with a constant, stabilized 30VDC voltage. The redundant Bus Power Supply has two integrated power supplies to increase operation reliability. If one mains voltage or one of the internal
€341,27 Incl. tax
The MDT KNX Power Supply with integrated choke supplies the KNX Bus with a constant, stabilized 30VDC voltage. The integrated bus coupling unit with diagnostic function monitors the bus voltage, bus current, bus overload and bus voltafe failure/return. Al
€362,85 Incl. tax
The MDT KNX/EIB Power Supply with integrated choke produces the stabilized KNX system voltage (30VDC) to supply the connected KNX/EIB components. The operating status is indicated via 3 LED.
€127,00 Incl. tax