Collection
Compact power supply 1280 mA with integrated choke. Rapid diagnosis ETS communication objects. Operational status and bus line analysis possible by means ETS. Extra voltage output for feeding an extra line in combination with an extra choke.
€289,13 Incl. tax
The MDT KNX Power Supply with integrated choke supplies the KNX Bus with a constant, stabilized 30VDC voltage. The integrated bus coupling unit with diagnostic function monitors the bus voltage, bus current, bus overload and bus voltafe failure/return. Al
€362,85 Incl. tax
The MDT Binary Input is available in 4 versions, input detection of 24VAC/DC signals, input detection of 230VAC signals and inputs fot potential free contacts. The Binary Input reacts depending on its programmed parameters and sends a telegram on the KNX
€331,76 Incl. tax
The MDT Binary Input is available in 3 versions, input detection of 24VAC/DC signals, input detection of 230VAC signals and inputs fot potential free contacts. The Binary Input reacts depending on its programmed parameters and sends a telegram on the KNX
€283,14 Incl. tax
The MDT Binary Input is available in 3 versions, input detection of 24VAC/DC signals, input detection of 230VAC signals and inputs fot potential free contacts. The Binary Input reacts depending on its programmed parameters and sends a telegram on the KNX
€283,14 Incl. tax
The new AKS series offers more channels at less space, so lower costs per channel.
The MDT Switch Actuator receives KNX/EIB telegrams and switches up to 20 independent electrical loads. Each output uses a bistable relay and can be operated manually via a
€362,58 Incl. tax
The MDT Switch Actuator AKK receives KNX/EIB telegrams and switches up to 24 independent electrical loads.
Each output uses a bistable relay.
€317,75 Incl. tax
The MDT Universal Actuator receives KNX/EIB telegrams can be used as Switch Actuator or Shutter Actuator. Mixed applications from Switch- and Shutter Actuators are possible. Each output uses a bistable relay and can be operated manually via button.
€387,04 Incl. tax
The MDT KNX/EIB Power Supply with integrated choke produces the stabilized KNX system voltage (30VDC) to supply the connected KNX/EIB components. The operating status is indicated via 3 LED.
€127,00 Incl. tax
Rated contact frequency: 50/60 Hz
2 floating relay contacts
Contact rated current according to DIN EN 60669-1: 10 A (resistive load)
€79,71 Incl. tax
The MDT LED Controller receives KNX/EIB telegrams and controls 12/24V RGBW LED stripes.
€134,02 Incl. tax
UP 220/21
Pushbutton interface 2 x potential-free contact, output for LED control
2 inputs / outputs
€40,90 Incl. tax