- Two outputs for switching and dimming resistive, inductive or capacitive loads
- Automatic adjustment to leading edge or trailing edge control, depending on the type of load
- Rated operational voltage AC 230 V
- Rated frequency 50 / 60 Hz
- Rated power at +35°C ambient temperature: 300 VA per output or 500 VA for single output usage, without any minimal load per output
- Electronic protection of each output against overload, short circuit and temperature rise
- Screw terminals for connection and through-wiring of untreated single-core, stranded or multi-core conductors, 0.5 ... 2.5 mm²
- Bicolor LED for indicating the switch status (red = on, green = off) or an error (orange, blinking) per output
- Bus-powered electronics
- Integrated bus coupling unit, bus connection via bus terminal block
- Device for DIN-rail mounting on a TH35 mounting rail according to DIN EN 60715
N 528D01 Universal dimmer, 2 x 300 VA, AC 230 V
€170,56 Excl. tax
€328,00 Excl. tax
€206,38 Incl. tax €396,88 Incl. tax. Out of stock, but available
€206,38 Incl. tax €396,88 Incl. tax. Out of stock, but available
Two outputs for switching and dimming resistive, inductive or capacitive loads
Automatic adjustment to leading edge or trailing edge control, depending on the type of load
Rated operational voltage AC 230 V Read more
Specifications
Brand:
Siemens
Article number:
5WG1528-1DB01
EAN:
7612914104809
Availability:
Out of stock, but available
Information
N 528D01 Universal dimmer 2 x 300 VA, AC 230 V
- Per output with selectable mode (normal mode, one- or two-level timer mode, blinking)
- Adjustable ON- and OFF-delay
- Separately adjustable dimming time from 0% to 100% for switching on/off and dimming brighte/darker
- The ability to switch an output on or off by dimming brighter/darker
- Adjustable dimming value when switching on
- Immediate activation (jumping) or dimming to a new dimming value
- Selectable additional status object switching and/or status object dimming value for each output
- Additional object for each output for blocking/releasing the output
- Sending of status objects on request and/or automatically after a change
- Adjustable blocking time for sending status objects after restart and bus voltage recovery
- Adjustable dimming value for each output in the event of bus voltage failure and recovery
- Additional night mode object for time-limited switching on the output (and hence illumination) at night
- Adjustable ON period at night or with timer mode
- Selectable warning of imminent switching off the illumination by dimming to 50% of the previous dimming value during night mode or timer mode
- Integrated 8-bit scene control and integration of each output in up to 8 scenes
- Separately adjustable dimming time for scene control
- Selectable counting of operating hours and with threshold monitoring of the operating hours
- Selectable counting of load cycles and with threshold monitoring of the load cycles
- Optional disabling of the ripple control compensation in an electrical grid with frequency fl uctuations
- Building site function for switching the building site lighting on and off even if the bus devices have not yet been commissioned with ETS
