Switch Actuators
The MDT Switch Actuator AKK receives KNX/EIB telegrams and switches up to 3 independent electrical loads.
Each output uses relay (AKK-01UP.03: bistable relais, AKK-02/03UP.03: monostable relais).
€114,04 Incl. tax
Analog In-/Output 2-fold
Flush mounted, input voltage 0-12V/2-10V
or current loop 0-20mA/4-20mA
output voltage 0-10V
€116,09 Incl. tax
The MDT Switch Actuator AKK receives KNX/EIB telegrams and switches up to 24 independent electrical loads.
Each output uses a bistable relay.
€121,91 Incl. tax
2-channel Switching Actuator or 1-channel Blinds / Awnings Actuator.
Maximum switching capacity of up to 16A per channel, 2 voltage-free contacts.
€124,68 Incl. tax
KNX Switching Actuator which can work as:
· 2-channel Switching Actuator.
· 1-channel Blinds/Shutters Actuator.
It has 4 Analog/Digital inputs, which can be configured independently, through the ETS:
€124,93 Incl. tax
The KNX IO 532 (1D1O) is a compact combined dimming/switching actuator with 1 PWM dimming output for LEDs and 1 bi-stable relay output.
€126,18 Incl. tax
8 slots for a sensor/actuator module, type RS or RL
Internal bus cable for connection of the sensor/actuator module to the bus
€133,39 Incl. tax
The MDT Switch Actuator AKK receives KNX/EIB telegrams and switches up to 24 independent electrical loads.
Each output uses a bistable relay.
€147,86 Incl. tax
The MDT Switch Actuator AKK receives KNX/EIB telegrams and switches up to 3 independent electrical loads (AKK-04FC.03 4 loads).
Each output uses a monostable relay and is individually agjustable via ETS. In operation mode as fan coil actuator a 3-step (A
€151,01 Incl. tax
Rated contact current according to DIN EN 60669: 6 AX (70 µF fluorescent lamp load), 10 A (resistive load)
€151,64 Incl. tax
Analog In-/Output 4-fold
2SU MDRC mounted, input voltage 0-12V/2-10V
or current loop 0-20mA/4-20mA
output voltage 0-10V
€154,78 Incl. tax
4 fold Control device 1-10V 4SU MDRC, 10A C-load
€162,95 Incl. tax
