MDT
Analog In-/Output 4-fold
2SU MDRC mounted, input voltage 0-12V/2-10V
or current loop 0-20mA/4-20mA
output voltage 0-10V
€154,78 Incl. tax
The MDT KNX Power Supply with integrated choke supplies the KNX Bus with a constant, stabilized 30VDC voltage. The integrated bus coupling unit with diagnostic function monitors the bus voltage, bus current, bus overload and bus voltafe failure/return. Al
€362,85 Incl. tax
The MDT Universal Actuator receives KNX/EIB telegrams can be used as Switch Actuator or Shutter Actuator. Mixed applications from Switch- and Shutter Actuators are possible. Each output uses a bistable relay and can be operated manually via button.
€387,04 Incl. tax
The Universal Interface detects status changes at the inputes and triggers KNX telegrams depending on his parameterizations.
€150,89 Incl. tax
The MDT KNX RF+ Wireless Line Coupler connects MDT KNX RF+ devices with the KNX bus. The line coupler has extensive filtering functions to minimize bus load on the wireless route.
€268,93 Incl. tax
Weather Station Home Outdoor installation on wall or pole, integrated BCU
€374,72 Incl. tax
The MDT Temperature Controller is used for all purpose temperature control applications. The temperature is received as an KNX object or directly from the connected PT1000 temperature sensors (Only SCN-RT6AP.01, SCN-RT2UP.01 or SCN-RT4UP.01).
€124,58 Incl. tax
The MDT Switch Actuator AKK receives KNX/EIB telegrams and switches up to 24 independent electrical loads.
Each output uses a bistable relay.
€423,92 Incl. tax
The MDT VisuControl Touch Panel is used for the visualisation of the current building status and to control building functions.
€2.141,64 Incl. tax
The MDT Switch Actuator receives KNX/EIB telegrams and switches up to 12 independent electrical loads.
The MDT Switch Actuator offers current measurement for each channel and measurement of the total current.
The measured data can be transmit in differe
€361,00 Incl. tax
The inputs of the MDT Universal Interface react depending on their programmed parameters and send a telegram on the KNX bus.
You can connect conventional push-buttons or auxiliary contacts (eg door and window contacts) to the device
€84,66 Incl. tax
The MDT KNX RF+ Glas Push Button Plus releases KNX telegrams after touching the sensor areas on top, 1 or 2 button operation can be parameterized.
€178,38 Incl. tax
