MDT
Depending on its parameterization the MDT Glass Push Button II Lite releases KNX telegrams. The sensor areas can be programmed for 1 or 2 button operation (BE-GTL4xx.01: 4 single sensor buttons). The RGBW status LEDs can be controlled with internal or ext
€110,90 Incl. tax
The MDT Temperature Controller is used for all purpose temperature control applications. The temperature is received as an KNX object or directly from the connected PT1000 temperature sensors (Only SCN-RT6AP.01, SCN-RT2UP.01 or SCN-RT4UP.01).
€124,58 Incl. tax
The inputs of the MDT Universal Interface react depending on their programmed parameters and send a telegram on the KNX bus.
You can connect conventional push-buttons or auxiliary contacts (eg door and window contacts) to the device
€44,93 Incl. tax
The new AKS series offers more channels at less space, so lower costs per channel.
The MDT Switch Actuator receives KNX/EIB telegrams and switches up to 20 independent electrical loads. Each output uses a bistable relay and can be operated manually via a
€442,80 Incl. tax
The inputs of the MDT Universal Interface react depending on their programmed parameters and send a telegram on the KNX bus.
You can connect conventional push-buttons or auxiliary contacts (eg door and window contacts) to the device
€84,66 Incl. tax
The MDT KNX Push Button releases KNX telegrams after pushing the buttons on top.
€100,67 Incl. tax
The MDT Glass Push Button II Smart releases KNX telegrams after touching the sensor areas on top, 1 or 2 Button operation can be adjusted. The device provides extensive functions like switching of lighting, operation of blinds and shutters, contact type a
€190,33 Incl. tax
The MDT LED Indicator allows to display universal logical and building functions.
€124,58 Incl. tax
The MDT Shutter Actuator with monostable relays is individually programmable by the ETS. Switching, alarm, central and blocking functions are available as well as extensive calibration and positioning functions. In addition to the function as a shutter ac
€109,72 Incl. tax
Metal built-in box for wall mounting For touch panel VisuControl 7 "/ 17.7 cm (wxhxd): 213 x 171 x 84 mm
€79,28 Incl. tax
The MDT VisuControl Touch Panel is used for the visualisation of the current building status and to control building functions.
€2.141,64 Incl. tax
The MDT KNX RF+ Wireless Line Coupler connects MDT KNX RF+ devices with the KNX bus. The line coupler has extensive filtering functions to minimize bus load on the wireless route.
€268,93 Incl. tax
