MDT
The MDT Heating Actuator receives KNX/EIB telegrams and controls up to independent electrical outputs.
Each channel has its own LED indicator
€220,89 Incl. tax
The MDT Binary Input is available in 4 versions, input detection of 24VAC/DC signals, input detection of 230VAC signals and inputs fot potential free contacts. The Binary Input reacts depending on its programmed parameters and sends a telegram on the KNX
€216,86 Incl. tax
The MDT Shutter Actuator receives KNX/EIB telegrams and controls up to 8 independent shutter or sunblind drives.
Each output uses two monostable relays. The MDRC Shutter Actuators can be operated manually via a push button.
€215,50 Incl. tax
KNX IP Interface: The IP Interface enables the communication between the PC and the KNX/EIB system via LAN.
The KNX IP Interface allows to programm the KNX bus via TCP/IP, 4 simultaneous connections possible.
€213,54 Incl. tax
The MDT LED Controller receives KNX/EIB telegrams and controls 12/24V RGBW LED stripes.
€212,36 Incl. tax
The MDT Switch Actuator AKK receives KNX/EIB telegrams and switches up to 24 independent electrical loads.
Each output uses a bistable relay.
€211,57 Incl. tax
The MDT Switch Actuator receives KNX/EIB telegrams and switches up to 12 independent electrical loads.
The MDT Switch Actuator offers current measurement for each channel and measurement of the total current.
The measured data can be transmit in differe
€210,78 Incl. tax
The MDT Switch Actuator receives KNX/EIB telegrams and switches up to 12 independent electrical loads. Each output uses a bistable relay, with mechanical manual operation for direct actuation of the relay contact.
€202,92 Incl. tax
The MDT LED Controller receives KNX/EIB telegrams and controls 12/24V RGBW LED stripes.
€201,97 Incl. tax
The MDT Shutter Actuator receives KNX/EIB telegrams and controls up to 8 independent shutter or sunblind drives.
Each output uses two monostable relays. The MDRC Shutter Actuators can be operated manually via a push button.
€199,77 Incl. tax
The MDT Universal Actuator receives KNX/EIB telegrams can be used as Switch Actuator or Shutter Actuator. Mixed applications from Switch- and Shutter Actuators are possible. Each output uses a bistable relay and can be operated manually via button.
€198,20 Incl. tax
The MDT Heating Actuator receives KNX/EIB telegrams and controls up to independent electrical outputs.
Each channel has its own LED indicator
€197,48 Incl. tax
