Collection

The KNX Secure CO KNT LC1 KNX Line Coupler is a KNX line coupler with a compact design. It connects two KNX segments (e.g. a KNX line with a KNX area).

The MDT Switch Actuator receives KNX/EIB telegrams and switches up to 6 independent electrical loads.

The MDT Switch Actuator offers current measurement for each channel and measurement of the total current. In dependence on the parameterization the me

KNX Panel with integrated bus coupler. Suitable for wall and furniture installation. With standard KNX-functions. Optionally with status LEDs.

Specifically for installation cut-outs with a material thickness of 2-4 mm, Largho design panels are simply f

KNX Panel with integrated bus coupler. Suitable for wall and furniture installation. With standard KNX-functions. Optionally with status LEDs.

Specifically for installation cut-outs with a material thickness of 2-4 mm, Largho design panels are simply f

4-channel Universal Dimming Actuator for:
· Incandescence and 230V Halogen lamps.
· LV Halogen lamp with electronic transformer.
· Dimmable 230V LED lamps.
· Dimmable 12V - LED lamps (electronic transformer).
Leading or Trailing edge dimming technolo

The MDT Switch Actuator AKK receives KNX/EIB telegrams and switches up to 24 independent electrical loads.
Each output uses a bistable relay.

KNX Panel Barchetto with integrated bus coupler. Suitable for wall and furniture installation. With standard KNX-functions. Optionally with status LEDs.
KNX Panel 4-fold – 4 buttons with selectable functions: light on/off/toggle/dimming, shutters/ louver

KNX Panel Barchetto with integrated bus coupler. Suitable for wall and furniture installation. With standard KNX-functions. Optionally with status LEDs.
KNX Panel 4-fold – 4 buttons with selectable functions: light on/off/toggle/dimming, shutters/ louver

KNX Panel 6-fold – 6 buttons with selectable functions: light on/off/toggle/dimming, shutters/ louvers, value setting, scene recall and programming (8Bit), 4 status LEDs – integrated bus coupler. Size: 50x118x35 mm

KNX Panel 6-fold – 6 buttons with selectable functions: light on/off/toggle/dimming, shutters/ louvers, value setting, scene recall and programming (8Bit), 4 status LEDs – integrated bus coupler. Size: 50x118x35 mm

KNX Panel with integrated bus coupler. Suitable for wall and furniture installation. With standard KNX-functions. Optionally with status LEDs.

Specifically for installation cut-outs with a material thickness of 2-4 mm, Largho design panels are simply f

KNX Panel with integrated bus coupler. Suitable for wall and furniture installation. With standard KNX-functions. Optionally with status LEDs.

Specifically for installation cut-outs with a material thickness of 2-4 mm, Largho design panels are simply f

The MDT Binary Input is available in 4 versions, input detection of 24VAC/DC signals, input detection of 230VAC signals and inputs fot potential free contacts. The Binary Input reacts depending on its programmed parameters and sends a telegram on the KNX

Weinzierl KNX ENO 636 Secure
The KNX ENO 636 secure device serves as a bidirectional gateway between EnOcean wireless devices and the KNX bus. With this device, commands and measured values from EnOcean wireless sensors can be transmitted to the KNX bus,

Passive infrared detector for ceiling installation
Horizontal 360° motion detection area
Presence/motion detection up to 64 m² / 400 m² (depending on mounting or room height)

The MDT Dimming Actuator receives KNX/EIB telegrams and dimms/switches up to 4 independent electrical loads. Each output can be operated manually via a push button.

The MDT Switch Actuator receives KNX/EIB telegrams and switches up to 12 independent electrical loads. Each output uses a bistable relay, with mechanical manual operation for direct actuation of the relay contact.

The MDT KNX Power Supply with integrated choke supplies the KNX Bus with a constant, stabilized 30VDC voltage. The redundant Bus Power Supply has two integrated power supplies to increase operation reliability. If one mains voltage or one of the internal

KNX IP Router: This Interface offers the same functions as the IP interface, but the device routes telegrams as a line coupler using the the LAN.

Rated contact current according to DIN EN 60669: 16 AX / 20 AX (200 μF fluorescent lamp load)

KNX/Panasonic TV interface

KNX Panel with integrated bus coupler. Suitable for wall and furniture installation. With standard KNX-functions. Optionally with status LEDs.

Specifically for installation cut-outs with a material thickness of 2-4 mm, Largho design panels are simply f

KNX Panel with integrated bus coupler. Suitable for wall and furniture installation. With standard KNX-functions. Optionally with status LEDs.

KNX Panel 10-fold – 10 buttons with selectable function: light on/off/toggle/dimming, shutters/ louvers, valu

ISE SMART CONNECT KNX SONOS
Easily control up to ten Sonos master devices, each with up to 5 slaves per master, via KNX. Optionally, each room can be operated separately or, using party mode, the entire house simultaneously.