Collection

The MDT Switch Actuator AKK receives KNX/EIB telegrams and switches up to 24 independent electrical loads.
Each output uses a bistable relay.

The inputs of the MDT Universal Interface react depending on their programmed parameters and send a telegram on the KNX bus.
You can connect conventional push-buttons or auxiliary contacts (eg door and window contacts) to the device

MDT BE-04230.02: 4-channel KNX binary input for 230V, 2TE. Innovative, with LED, logic, dimming and blind control."

The MDT Binary Input is available in 4 versions, input detection of 24VAC/DC signals, input detection of 230VAC signals and inputs fot potential free contacts. The Binary Input reacts depending on its programmed parameters and sends a telegram on the KNX

The new MDT security module prevents all connection-oriented accesses of the ETS, such as the programming and also the unloading of the bus devices, in the KNX line. This significantly increases the safety of the protected line in the inner and in the out

The MDT Logic Module is used for fast and easy compilation of Logic functions to control building automation systems. All the functions are parametrized directly in the ETS without additionally software tools. There are 24 independent function blocks with

KNX IP Router: This Interface offers the same functions as the IP interface, but the device routes telegrams as a line coupler using the the LAN.

KNX IP Interface: The IP Interface enables the communication between the PC and the KNX/EIB system via LAN.
The KNX IP Interface allows to programm the KNX bus via TCP/IP, 4 simultaneous connections possible.

This Interface connects two KNX lines to each other. Electrical isolation between the lines and reduction of the busload by using the filter function.

The USB Interface enables the communication between the PC and the KNX/EIB system. The USB interface is galvanically isolated from the KNX/EIB bus.

The MDT Shutter Actuator with monostable relays is individually programmable by the ETS. Switching, alarm, central and blocking functions are available as well as extensive calibration and positioning functions. In addition to the function as a shutter ac

The MDT LED Controller receives KNX/EIB telegrams and controls 12/24V RGBW LED stripes.

The MDT Dimming Actuator receives KNX/EIB telegrams and dimms/switches up to 4 independent electrical loads. Each output can be operated manually via a push button.

The MDT KNX Power Supply with integrated choke supplies the KNX Bus with a constant, stabilized 30VDC voltage. The redundant Bus Power Supply has two integrated power supplies to increase operation reliability. If one mains voltage or one of the internal

The MDT KNX Power Supply with integrated choke supplies the KNX Bus with a constant, stabilized 30VDC voltage. The integrated bus coupling unit with diagnostic function monitors the bus voltage, bus current, bus overload and bus voltafe failure/return. Al

The MDT KNX/EIB Power Supply with integrated choke produces the stabilized KNX system voltage (30VDC) to supply the connected KNX/EIB components. The operating status is indicated via 3 LED.