Collection
The MDT Glass Push Button II Smart releases KNX telegrams after touching the sensor areas on top, 1 or 2 Button operation can be adjusted. The device provides extensive functions like switching of lighting, operation of blinds and shutters, contact type a
€190,33 Incl. tax
The inputs of the MDT Universal Interface react depending on their programmed parameters and send a telegram on the KNX bus.
You can connect conventional push-buttons or auxiliary contacts (eg door and window contacts) to the device
€84,66 Incl. tax
The MDT KNX RF+ Shutter Actuator receives KNX/EIB telegrams and controls 1 indipendent shutter or sunblind drive.
The output uses two monostable relays.
€146,29 Incl. tax
The MDT KNX Push Button Plus releases KNX telegrams after pushing the buttons on top.
€146,29 Incl. tax
The MDT KNX/EIB Power Supply with integrated choke produces the stabilized KNX system voltage (30VDC) to supply the connected KNX/EIB components. The operating status is indicated via 3 LED.
€195,05 Incl. tax
The MDT Universal Actuator receives KNX/EIB telegrams can be used as Switch Actuator or Shutter Actuator. Mixed applications from Switch- and Shutter Actuators are possible. Each output uses a bistable relay and can be operated manually via button.
€387,04 Incl. tax
Metal built-in box for wall mounting For touch panel VisuControl 7 "/ 17.7 cm (wxhxd): 213 x 171 x 84 mm
€75,98 Incl. tax
The MDT KNX Push Button releases KNX telegrams after pushing the buttons on top.
€100,67 Incl. tax
The MDT Glass Push Button II Smart releases KNX telegrams after touching the sensor areas on top, 1 or 2 Button operation can be adjusted. The device provides extensive functions like switching of lighting, operation of blinds and shutters, contact type a
€190,33 Incl. tax
The MDT Temperature Controller is used for all purpose temperature control applications. The temperature is received as an KNX object or directly from the connected PT1000 temperature sensors (Only SCN-RT6AP.01, SCN-RT2UP.01 or SCN-RT4UP.01).
€124,58 Incl. tax
The MDT KNX Power Supply with integrated choke supplies the KNX Bus with a constant, stabilized 30VDC voltage. The integrated bus coupling unit with diagnostic function monitors the bus voltage, bus current, bus overload and bus voltafe failure/return. Al
€245,39 Incl. tax
The inputs of the MDT Universal Interface react depending on their programmed parameters and send a telegram on the KNX bus.
You can connect conventional push-buttons or auxiliary contacts (eg door and window contacts) to the device
€44,93 Incl. tax
