Collection
The MDT Dimming Actuator receives KNX/EIB telegrams and dimms/switches up to 4 independent electrical loads. Each output can be operated manually via a push button.
€335,05 Incl. tax
Passive infrared detector for ceiling installation
Horizontal 360° motion detection area
Presence/motion detection up to 64 m² / 400 m² (depending on mounting or room height)
€334,11 Incl. tax
Weinzierl KNX ENO 636 Secure
The KNX ENO 636 secure device serves as a bidirectional gateway between EnOcean wireless devices and the KNX bus. With this device, commands and measured values from EnOcean wireless sensors can be transmitted to the KNX bus,
€333,83 Incl. tax
The MDT Binary Input is available in 4 versions, input detection of 24VAC/DC signals, input detection of 230VAC signals and inputs fot potential free contacts. The Binary Input reacts depending on its programmed parameters and sends a telegram on the KNX
€331,76 Incl. tax
KNX Panel with integrated bus coupler. Suitable for wall and furniture installation. With standard KNX-functions. Optionally with status LEDs.
Specifically for installation cut-outs with a material thickness of 2-4 mm, Largho design panels are simply f
€325,61 Incl. tax
KNX Panel with integrated bus coupler. Suitable for wall and furniture installation. With standard KNX-functions. Optionally with status LEDs.
Specifically for installation cut-outs with a material thickness of 2-4 mm, Largho design panels are simply f
€325,61 Incl. tax
KNX Panel 6-fold – 6 buttons with selectable functions: light on/off/toggle/dimming, shutters/ louvers, value setting, scene recall and programming (8Bit), 4 status LEDs – integrated bus coupler. Size: 50x118x35 mm
€325,49 Incl. tax
KNX Panel 6-fold – 6 buttons with selectable functions: light on/off/toggle/dimming, shutters/ louvers, value setting, scene recall and programming (8Bit), 4 status LEDs – integrated bus coupler. Size: 50x118x35 mm
€325,49 Incl. tax
KNX Panel Barchetto with integrated bus coupler. Suitable for wall and furniture installation. With standard KNX-functions. Optionally with status LEDs.
KNX Panel 4-fold – 4 buttons with selectable functions: light on/off/toggle/dimming, shutters/ louver
€320,65 Incl. tax
KNX Panel Barchetto with integrated bus coupler. Suitable for wall and furniture installation. With standard KNX-functions. Optionally with status LEDs.
KNX Panel 4-fold – 4 buttons with selectable functions: light on/off/toggle/dimming, shutters/ louver
€320,65 Incl. tax
The MDT Switch Actuator AKK receives KNX/EIB telegrams and switches up to 24 independent electrical loads.
Each output uses a bistable relay.
€317,75 Incl. tax
4-channel Universal Dimming Actuator for:
· Incandescence and 230V Halogen lamps.
· LV Halogen lamp with electronic transformer.
· Dimmable 230V LED lamps.
· Dimmable 12V - LED lamps (electronic transformer).
Leading or Trailing edge dimming technolo
€315,68 Incl. tax
KNX Panel with integrated bus coupler. Suitable for wall and furniture installation. With standard KNX-functions. Optionally with status LEDs.
Specifically for installation cut-outs with a material thickness of 2-4 mm, Largho design panels are simply f
€314,72 Incl. tax
KNX Panel with integrated bus coupler. Suitable for wall and furniture installation. With standard KNX-functions. Optionally with status LEDs.
Specifically for installation cut-outs with a material thickness of 2-4 mm, Largho design panels are simply f
€314,72 Incl. tax
The MDT Switch Actuator receives KNX/EIB telegrams and switches up to 6 independent electrical loads.
The MDT Switch Actuator offers current measurement for each channel and measurement of the total current. In dependence on the parameterization the me
€313,03 Incl. tax
The KNX Secure CO KNT LC1 KNX Line Coupler is a KNX line coupler with a compact design. It connects two KNX segments (e.g. a KNX line with a KNX area).
€312,42 Incl. tax
The KNX PowerSupply USB 367 is a 640 mA bus power supply with high efficiency and a small footprint of only 4 units (72 mm). The device has a bus choke, an integrated USB Interface (Micro USB connector)
€311,31 Incl. tax
The MDT Switch Actuator receives KNX/EIB telegrams and switches up to 12 independent electrical loads.
The MDT Switch Actuator offers current measurement for each channel and measurement of the total current.
The measured data can be transmit in differe
€308,31 Incl. tax
The new AKS series offers more channels at less space, so lower costs per channel.
The MDT Switch Actuator receives KNX/EIB telegrams and switches up to 20 independent electrical loads. Each output uses a bistable relay and can be operated manually via a
€306,74 Incl. tax
ISE SMART CONNECT KNX HUE
The Philips Hue lighting system can now also be operated via KNX. Colour value, temperature and brightness can be defined for every light, making each completely customisable.
€303,65 Incl. tax
QMX3.P37-1BSC
Room operator unit KNX with temperature sensor, segmented backlit display, configurable touchkeys, LED display, black
€299,66 Incl. tax
The MDT Shutter Actuator receives KNX/EIB telegrams and controls up to 8 independent shutter or sunblind drives.
Each output uses two monostable relays. The MDRC Shutter Actuators can be operated manually via a push button.
€298,87 Incl. tax
The MDT Shutter Actuator receives KNX/EIB telegrams and controls up to 8 independent shutter or sunblind drives.
Each output uses two monostable relays. The MDRC Shutter Actuators can be operated manually via a push button.
€295,72 Incl. tax
The KNX IP Interface 740.1 wireless serves as a wireless interface to the KNX bus based on WLAN. The device can be used as a programming interface for the ETS® and is a wireless alternative to USB or wired IP interfaces. The bus access via WIFI allows the
€293,39 Incl. tax