Description:
Universal Dimming Actuator for: · Incandescence and 230V Halogen lamps. · LV Halogen lamp with ferromagnetic transformer. · LV Halogen lamp with electronic transformer. · Dimmable 230V LED lamps. · Dimmable 12V~ LED lamps (electronic transformer). · Dimmable Compact Fluorescent lamps. Leading or Trailing edge dimming technology. 1 channel with a maximum load capacity of 1.000W. Optional manual dimming control by built-in potentiometer (even without bus connection). Protected against overloads and short-circuits. Built-in resettable heating protection. Modular installation device. DIN-rail mounting. 5-modules wide. Anti-panic input for safety systems: disabling this input, the lamps will turn on to the maximum brightness ignoring the dimming. Programming and commissioning by ETS3 or later version.
| Technical characteristics RE KNT 000 | |
| Product reference | RE KNT 000 |
| Power Supply (V) | 230VCA |
| Frequency (Hz) | 50 |
| Consumption | 3,9mA |
| Output channels | 1 |
| Type of load | LED lamps, Incandescent and Halogens |
| Dimmable 230V LED lamps (leading edge) | 7W ~ 300W |
| Dimmable 230V LED lamps (trailing edge) | 7W ~ 1000W |
| Dimmable 12V LED lamps with electronic transformer | 900VA |
| Incandescent and Halogen 230V (W) | 1000 |
| 12V Halogen with electronic transformer (W) | 1000 |
| Halogen lamps with ferromagnetic trafo (W | 800 |
| Motores (VA) | 0 |
| Maximum current input 1/10VDC (mA) | 0 |
| Maximum Number of Equipments | 0 |
| Binary/Analogic Inputs | 0 |
| Installation | DIN Rail |
| Module number | 5 |
| Control | KNX Bus |
| Programming by | ETS3 o posterior |
| Compatible with | KNX |
| Connection terminals | Captive Screws |
| Cable section (mm2) | 6 |
| Minimum Storage Temperature (ºC) (min) | -30 |
| Maximum Storage Temperature (ºC) (max) | 70 |
| Minimum Working Temperature (ºC) (min) | -5 |
| Maximum Working Temperature (ºC) (max) | 45 |
| Protection Degree | IP20 , UNE 20324 |
