KNX Paneel Largho 12-fold with room temperature regulator and Diisplay with flat buttons
KNX Panel with integrated bus coupler. Suitable for wall and furniture installation. With standard KNX-functions. Optionally with status LEDs.
KNX Panel 12-fold with room temperature regulator and LCD display – PI-, 2-point or sequence regulator, 12 buttons with selectable functions: light on/off/toggle/dimming, set-point adjustment, fan adjustment, shutters/louvers, value setting, scene recall and programming (8bit) – integrated bus coupler. Size: 80x230x32 mm
Specifically for installation cut-outs with a material thickness of 2-4 mm, Largho design panels are simply fixed into the cut-out with clamp springs on the casing. For mounting on drywalls or for flush-mounted fitting, IPAS offers suitable wall boxes.
IPAS design panels consist of one unit and are solely run with bus voltage. An additional power supply is not required.
Switching, dimming, value setting, incremental value setting, shutter, scene control, set point adjustment, operating mode setting, presence, fan control, single buttons (on, off, toggle).
There is a choice of the following variants:
|60601-112-17-0C||KNX Tableau 12-fold with RTR and Display with Aluminium anodized with flat buttons|
|60601-113-17-0C||KNX Tableau 12-fold with RTR and Dijsplay with Powder coating RAL colour with flat buttons8|
|60601-114-17-0C||KNX Tableau 12-fold with RTR and Display with Powder coating effect-colour, with flat buttons|
|60601-111-17-0C||KNX Tableau 12-fold with RTR and Display with Stainless steel, with flat buttons|