KNX Paneel Largho 12-fold with room temperature regulator with flat buttons
Specifications
Information
KNX Panel 12-fold with room temperature regulator – PI-, 2-point or sequence regulator, 12 buttons with selectable functions: light on/off/toggle/dimming, set-point adjustment, fan adjustment, shutters/louvers, value setting, scene recall and programming (8bit) – integrated bus coupler. Size: 80x230x32 mm
Specifically for installation cut-outs with a material thickness of 2-4 mm, Largho design panels are simply fixed into the cut-out with clamp springs on the casing. For mounting on drywalls or for flush-mounted fitting, IPAS offers suitable wall boxes.
Connection
IPAS design panels consist of one unit and are solely run with bus voltage. An additional power supply is not required.
Standard functions
Switching, dimming, value setting, incremental value setting, shutter, scene control, set point adjustment, operating mode setting, presence, fan control, single buttons (on, off, toggle).
There is a choice of the following variants:
Item code | Description |
60601-112-20-0C | KNX Tableau 12-fold with RTR with Aluminium anodized with flat buttons |
60601-113-20-0C | KNX Tableau 12-fold with RTR with Powder coating RAL colour with flat buttons |
60601-114-20-0C | KNX Tableau 12-fold with RTR with Powder coating effect-colour, with flat buttons |
60601-111-20-0C | KNX Tableau 12-fold with RTR with Stainless steel, with flat buttons |