Schnittstelle
The Gira X1 was developed specifically for Smart Homes with a KNX network. It enables you to connect a variety of devices and monitor automated processes via app. Minimum effort for maximum comfort.
€927,91 Incl. tax
KNX IP Interface: The IP Interface enables the communication between the PC and the KNX/EIB system via LAN.
The KNX IP Interface allows to programm the KNX bus via TCP/IP, 4 simultaneous connections possible.
€213,54 Incl. tax
The KNX IP BAOS 773 is used as Interface for connecting to KNX both on telegram level (KNXnet/IP Tunneling) and on data point level (KNX Application Layer). Clients can directly access Group Objects via either a Binary Protocol (over TCP/IP or UDP/IP) or
€236,74 Incl. tax
The KNX IP BAOS 774 is used as Interface for connecting to KNX both on telegram level (KNXnet/IP Tunneling) and on data point level (KNX Application Layer).
€282,00 Incl. tax
The KNX IP BAOS 777 is a powerful universal device for KNX installation: Thanks to the integrated web server, the device enables the visualization and control of buildings, rooms and functions in a standard web browser on a PC or mobile devices such as sm
€362,19 Incl. tax
The KNX IP Interface 740.1 wireless serves as a wireless interface to the KNX bus based on WLAN. The device can be used as a programming interface for the ETS® and is a wireless alternative to USB or wired IP interfaces. The bus access via WIFI allows the
€293,39 Incl. tax
This interface allows establishing a bidirectional connection between a PC or a laptop and the KNX RF wireless network. The device complies with the specification of KNX RF and supports the protocol cEMI.
€143,69 Incl. tax
The KNX Serial Interface BAOS 870 serves as a simple integration solution for non-KNX devices. Designed as a RS-232 interface, the KNX Serial 870 uses the proven FT1.2 protocol (PEI 10) as message format. Moreover, the device supports the BAOS protocol fo
€154,76 Incl. tax
KNX USB Interface Stick 332
The KNX USB Stick 332 is a data interface between a PC or laptop and the KNX installation bus. It can be used as a programming interface for ETS® Software Version 3 (or higher) and supports KNX long frames. Long telegrams enab
€147,75 Incl. tax
The service interface consists of:
OCI702 service interface
USB 2.0 cable (Type A / B)
KNX service cable for Synco™ controllers (RJ45 / RJ45)
KNX service cable for Desigo™ TRA (RJ45 / jack plug 2.5 mm)
KNX service cable (RJ45 / KNX bus terminal)
€707,80 Incl. tax
Compatible with USB 2.0 and USB 3.0
For isolated access to the bus line over the built-in USB socket (type B)
For connection of a PC for addressing,etc
Support of bus telegrams with up to 64 bytes length
€169,88 Incl. tax
KSI-01U
USB interface; galvanic isolated bidirectional access to the KNX bus line; support up to 220 byte APDU
€136,13 Incl. tax