MDT
The MDT LED Controller receives KNX/EIB telegrams and controls 12/24V RGBW LED stripes.
€134,02 Incl. tax
The MDT Dimming Actuator receives KNX/EIB telegrams and dimms/switches up to 4 independent electrical loads. Each output can be operated manually via a push button.
€335,05 Incl. tax
The MDT Shutter Actuator receives KNX/EIB telegrams and controls up to 8 independent shutter or sunblind drives.
Each output uses two monostable relays. The MDRC Shutter Actuators can be operated manually via a push button.
€129,77 Incl. tax
The MDT Switch Actuator AKK receives KNX/EIB telegrams and switches up to 24 independent electrical loads.
Each output uses a bistable relay.
€211,57 Incl. tax
The MDT Switch Actuator receives KNX/EIB telegrams and switches up to 12 independent electrical loads. Each output uses a bistable relay, with mechanical manual operation for direct actuation of the relay contact.
€202,92 Incl. tax
The MDT KNX Power Supply with integrated choke supplies the KNX Bus with a constant, stabilized 30VDC voltage. The redundant Bus Power Supply has two integrated power supplies to increase operation reliability. If one mains voltage or one of the internal
€341,27 Incl. tax
The MDT KNX Power Supply with integrated choke supplies the KNX Bus with a constant, stabilized 30VDC voltage. The integrated bus coupling unit with diagnostic function monitors the bus voltage, bus current, bus overload and bus voltafe failure/return. Al
€362,85 Incl. tax
Smart 86 Switch: 6-button control with color display and temperature sensor. Versatile for smart home functions.
€187,19 Incl. tax
Advanced leakage sensor with bus coupler, electrolytic measurement, alarm function, optical signaling, adjustable delay, and IP66 protection. Size: Ø70x24mm.
€118,94 Incl. tax
The MDT Heating Actuator receives KNX/EIB telegrams and controls up to independent electrical outputs.
Each channel has its own LED indicator
€197,48 Incl. tax
The MDT Universal Actuator with monostable relays can be used as Switch Actuator 2-fold or Shutter Actuator 1-fold and is individually programmable by the ETS. Switching, alarm, central and lock functions are available as well as extensive calibration and
€127,29 Incl. tax
The MDT Universal Actuator receives KNX/EIB telegrams can be used as Switch Actuator or Shutter Actuator. Mixed applications from Switch- and Shutter Actuators are possible. Each output uses a bistable relay and can be operated manually via button.
€169,10 Incl. tax
Programming software VisuControl Pro tTo create individual solutions
VisuControl lite software already included in delivery
€479,92 Incl. tax
The MDT VisuControl Touch Panel is used for the visualisation of the current building status and to control building functions.
€103,50 Incl. tax
The MDT KNX Push Button Plus releases KNX telegrams after pushing the buttons on top.
€136,85 Incl. tax
The MDT Presence Detector is available in several versions, Presence Detector with light sensor and Presence Detector with light sensor plus constant level light intensity. The Presence Detectors captures the smallest movements with 1-4 pyro sensors and h
€7,08 Incl. tax
The Central Operation Unit Smart 86 combines a large number of functions in one device and serves as a central
control unit for your Smart Home. The integrated astronomical timer moves the blinds up in the morning automatically and down again after sunse
€250,11 Incl. tax
The MDT Push Button Smart 63 releases KNX telegrams depending on the paramerization after pressing the buttons. The RGBW status LEDs can be controlled with internal or external objects. The LED brightness is controllable via day/night or brightness object
€120,33 Incl. tax
The MDT Push Button Lite 63 releases KNX telegrams depending on the paramerization after pressing the buttons. The push buttons can be programmed for 1 or 2 button operation (BE-TAL63x4.01: 4 single buttons). The RGBW status LEDs can be controlled with in
€82,58 Incl. tax
The MDT Push Button Lite 63 releases KNX telegrams depending on the paramerization after pressing the buttons. The push buttons can be programmed for 1 or 2 button operation (BE-TAL63x4.01: 4 single buttons). The RGBW status LEDs can be controlled with in
€79,44 Incl. tax
The MDT Push Button Lite 55 releases KNX telegrams after pressing the buttons, 1 or 2 Button operation can be programmed.
Each button has two RGBW status LEDs. In addition to switching, dimming, shutters or sending values, numerous functions are availabl
€79,44 Incl. tax
The MDT Push Button Lite 55 Basic releases KNX telegrams depending on the paramerization after pressing the buttons.The push buttons can be programmed for 1 or 2 button operation. In addition to switching, dimming, blinds, scenes or sending values, a lot
€69,21 Incl. tax
The MDT Glass Push Button releases KNX telegrams after touching the sensor areas on top, 1 or 2 button operation can be parameterized.
€151,01 Incl. tax
The MDT Temperature Controller is used for all purpose temperature control applications. The temperature is received as an KNX object or directly from the connected PT1000 temperature sensors (Only SCN-RT6AP.01, SCN-RT2UP.01 or SCN-RT4UP.01).
€105,71 Incl. tax
PT 1000 Sensor standard
Afmetingen 6 mm x 50 mm, aansluitkabel 3 m
€18,88 Incl. tax
The MDT Room Temperature/humidity sensor 55 detects temperature and humidity in indoor rooms, the dew point is calculated automatically. For the sensors the Min./Max values can be set in the paramerization of the device and approbiate actions can be defin
€107,59 Incl. tax
The MDT KNX/EIB Power Supply with integrated choke produces the stabilized KNX system voltage (30VDC) to supply the connected KNX/EIB components. The operating status is indicated via 3 LED.
€143,14 Incl. tax
The MDT Binary Input is available in 3 versions, input detection of 24VAC/DC signals, input detection of 230VAC signals and inputs fot potential free contacts. The Binary Input reacts depending on its programmed parameters and sends a telegram on the KNX
€283,14 Incl. tax
The MDT Binary Input is available in 3 versions, input detection of 24VAC/DC signals, input detection of 230VAC signals and inputs fot potential free contacts. The Binary Input reacts depending on its programmed parameters and sends a telegram on the KNX
€283,14 Incl. tax
The MDT Binary Input is available in 4 versions, input detection of 24VAC/DC signals, input detection of 230VAC signals and inputs fot potential free contacts. The Binary Input reacts depending on its programmed parameters and sends a telegram on the KNX
€216,86 Incl. tax
The MDT Shutter Actuator receives KNX/EIB telegrams and controls up to 8 independent shutter or sunblind drives.
Each output uses two monostable relays. The MDRC Shutter Actuators can be operated manually via a push button.
€215,50 Incl. tax
The MDT Shutter Actuator receives KNX/EIB telegrams and controls up to 8 independent shutter or sunblind drives.
Each output uses two monostable relays. The MDRC Shutter Actuators can be operated manually via a push button.
€197,41 Incl. tax
The MDT Switch Actuator AKK receives KNX/EIB telegrams and switches up to 3 independent electrical loads (AKK-04FC.03 4 loads).
Each output uses a monostable relay and is individually agjustable via ETS. In operation mode as fan coil actuator a 3-step (A
€114,04 Incl. tax
The MDT Switch Actuator AKK receives KNX/EIB telegrams and switches up to 3 independent electrical loads.
Each output uses relay (AKK-01UP.03: bistable relais, AKK-02/03UP.03: monostable relais).
€73,14 Incl. tax
The MDT Switch Actuator AKK receives KNX/EIB telegrams and switches up to 24 independent electrical loads.
Each output uses a bistable relay.
€147,86 Incl. tax
The MDT Switch Actuator AKK receives KNX/EIB telegrams and switches up to 24 independent electrical loads.
Each output uses a bistable relay.
€121,91 Incl. tax