MDT

Page 4 of 10 | Products

2 channels LED Controller flush mounted device For 12/24V CV LED or TW

The MDT LED Controller receives KNX/EIB telegrams and controls 12/24V RGBW LED stripes.

The MDT LED Controller receives KNX/EIB telegrams and controls 12/24V RGBW LED stripes....

€110,76 Excl. tax
€134,02 Incl. tax

Available

Add to cart More information

4 fold Dimming Actuators AKD 6SU MDRC, 230VAC, 250W

The MDT Dimming Actuator receives KNX/EIB telegrams and dimms/switches up to 4 independent electrical loads. Each output can be operated manually via a push button.

The MDT Dimming Actuator receives KNX/EIB telegrams and dimms/switches up to 4 independent electrica...

€276,90 Excl. tax
€335,05 Incl. tax

Available

Add to cart More information

2 fold Shutter Actuator 2SU MDRC 10A, shutter motors 230VAC up to 600W

The MDT Shutter Actuator receives KNX/EIB telegrams and controls up to 8 independent shutter or sunblind drives.
Each output uses two monostable relays. The MDRC Shutter Actuators can be operated manually via a push button.

The MDT Shutter Actuator receives KNX/EIB telegrams and controls up to 8 independent shutter or sunb...

€107,25 Excl. tax
€129,77 Incl. tax

Available

Add to cart More information

8 fold Switch Actuators AKK compact 16A 230Vac

The MDT Switch Actuator AKK receives KNX/EIB telegrams and switches up to 24 independent electrical loads.
Each output uses a bistable relay.

The MDT Switch Actuator AKK receives KNX/EIB telegrams and switches up to 24 independent electrical ...

€174,85 Excl. tax
€211,57 Incl. tax

Available

Add to cart More information

Switch actuator AKI Industrial 4 fold 16/20A, C-Load 200µF

The MDT Switch Actuator receives KNX/EIB telegrams and switches up to 12 independent electrical loads. Each output uses a bistable relay, with mechanical manual operation for direct actuation of the relay contact.

The MDT Switch Actuator receives KNX/EIB telegrams and switches up to 12 independent electrical load...

€167,70 Excl. tax
€202,92 Incl. tax

Available

Add to cart More information

Redundant Bus Power Supply with diagnostic function

The MDT KNX Power Supply with integrated choke supplies the KNX Bus with a constant, stabilized 30VDC voltage. The redundant Bus Power Supply has two integrated power supplies to increase operation reliability. If one mains voltage or one of the internal

The MDT KNX Power Supply with integrated choke supplies the KNX Bus with a constant, stabilized 30VD...

€282,04 Excl. tax
€341,27 Incl. tax

Available

Add to cart More information

1280mA Bus Power Supply with diagnostic function 6SU MDRC

The MDT KNX Power Supply with integrated choke supplies the KNX Bus with a constant, stabilized 30VDC voltage. The integrated bus coupling unit with diagnostic function monitors the bus voltage, bus current, bus overload and bus voltafe failure/return. Al

The MDT KNX Power Supply with integrated choke supplies the KNX Bus with a constant, stabilized 30VD...

€299,88 Excl. tax
€362,85 Incl. tax

Available

Add to cart More information

Taster Smart 86 | Serie .02 with temperature sensor

Smart 86 Switch: 6-button control with color display and temperature sensor. Versatile for smart home functions.

Smart 86 Switch: 6-button control with color display and temperature sensor. Versatile for smart hom...

€154,70 Excl. tax
€187,19 Incl. tax

Available

Add to cart More information

Leakage sensor

Advanced leakage sensor with bus coupler, electrolytic measurement, alarm function, optical signaling, adjustable delay, and IP66 protection. Size: Ø70x24mm.

Advanced leakage sensor with bus coupler, electrolytic measurement, alarm function, optical signalin...

€98,30 Excl. tax
€118,94 Incl. tax

Available

Add to cart More information

6-fold Heating Actuator 3SU MDRC, to control electrothermic valve drives 24-230VAC

The MDT Heating Actuator receives KNX/EIB telegrams and controls up to independent electrical outputs.
Each channel has its own LED indicator

The MDT Heating Actuator receives KNX/EIB telegrams and controls up to independent electrical output...

€163,21 Excl. tax
€197,48 Incl. tax

Available

Add to cart More information

2/1 fold Universal Actuator 10A Flush mounted AKU-B2UP.03 with 4 pot free binary inputs

The MDT Universal Actuator with monostable relays can be used as Switch Actuator 2-fold or Shutter Actuator 1-fold and is individually programmable by the ETS. Switching, alarm, central and lock functions are available as well as extensive calibration and

The MDT Universal Actuator with monostable relays can be used as Switch Actuator 2-fold or Shutter A...

€105,20 Excl. tax
€127,29 Incl. tax

Available

Add to cart More information

4 /2 fold Universal Actuator AKU 4SU MDRC, 230VAC, 16A

The MDT Universal Actuator receives KNX/EIB telegrams can be used as Switch Actuator or Shutter Actuator. Mixed applications from Switch- and Shutter Actuators are possible. Each output uses a bistable relay and can be operated manually via button.

The MDT Universal Actuator receives KNX/EIB telegrams can be used as Switch Actuator or Shutter Actu...

€139,75 Excl. tax
€169,10 Incl. tax

Available

Add to cart More information

Programming software VisuControl Pro

Programming software VisuControl Pro tTo create individual solutions

VisuControl lite software already included in delivery

Programming software VisuControl Pro tTo create individual solutions

VisuControl lite software al...

€396,63 Excl. tax
€479,92 Incl. tax

Available

Add to cart More information

Glass cover frame black To fit VC1001.04 touchpanel

The MDT VisuControl Touch Panel is used for the visualisation of the current building status and to control building functions.

The MDT VisuControl Touch Panel is used for the visualisation of the current building status and to ...

€85,54 Excl. tax
€103,50 Incl. tax

Available

Add to cart More information

KNX RF+ Push Buttons Plus 4-fold with Actuator White glossy finish, status and orientation LED

The MDT KNX Push Button Plus releases KNX telegrams after pushing the buttons on top.

The MDT KNX Push Button Plus releases KNX telegrams after pushing the buttons on top....

€113,10 Excl. tax
€136,85 Incl. tax

Available

Add to cart More information

Mounting frame Slimline For MDT Presence Detectors with 4 sensors

The MDT Presence Detector is available in several versions, Presence Detector with light sensor and Presence Detector with light sensor plus constant level light intensity. The Presence Detectors captures the smallest movements with 1-4 pyro sensors and h

The MDT Presence Detector is available in several versions, Presence Detector with light sensor and ...

€5,85 Excl. tax
€7,08 Incl. tax

Available

Add to cart More information

Central Operation Unit Smart 86

The Central Operation Unit Smart 86 combines a large number of functions in one device and serves as a central
control unit for your Smart Home. The integrated astronomical timer moves the blinds up in the morning automatically and down again after sunse

The Central Operation Unit Smart 86 combines a large number of functions in one device and serves as...

€206,70 Excl. tax
€250,11 Incl. tax

Available

Add to cart More information

Taster Smart 63 4-fach mit Farbdisplay Reinweiß glänzend, mit Temp.-/Feuchtesensor

The MDT Push Button Smart 63 releases KNX telegrams depending on the paramerization after pressing the buttons. The RGBW status LEDs can be controlled with internal or external objects. The LED brightness is controllable via day/night or brightness object

The MDT Push Button Smart 63 releases KNX telegrams depending on the paramerization after pressing t...

€99,45 Excl. tax
€120,33 Incl. tax

Available

Add to cart More information

Push Button Lite 63 2-fold, with Temp. sensor studio white glossy finish, Version I/O and UP/DOWN symbool

The MDT Push Button Lite 63 releases KNX telegrams depending on the paramerization after pressing the buttons. The push buttons can be programmed for 1 or 2 button operation (BE-TAL63x4.01: 4 single buttons). The RGBW status LEDs can be controlled with in

The MDT Push Button Lite 63 releases KNX telegrams depending on the paramerization after pressing th...

€68,25 Excl. tax
€82,58 Incl. tax

Available

Add to cart More information

Push Button Lite 63 2-fold with Temp.sensor studio white glossy finish, Version NEUTRAL

The MDT Push Button Lite 63 releases KNX telegrams depending on the paramerization after pressing th...

€65,65 Excl. tax
€79,44 Incl. tax

Available

Add to cart More information

Push Button Lite 55 4-fold RGBW with temp.sensor white glossy finish, Version NEUTRAL

The MDT Push Button Lite 55 releases KNX telegrams after pressing the buttons, 1 or 2 Button operation can be programmed.
Each button has two RGBW status LEDs. In addition to switching, dimming, shutters or sending values, numerous functions are availabl

The MDT Push Button Lite 55 releases KNX telegrams after pressing the buttons, 1 or 2 Button operati...

€65,65 Excl. tax
€79,44 Incl. tax

Available

Add to cart More information

Push Button Lite 55 Basic 2-fold, white glossy finish

The MDT Push Button Lite 55 Basic releases KNX telegrams depending on the paramerization after pressing the buttons.The push buttons can be programmed for 1 or 2 button operation. In addition to switching, dimming, blinds, scenes or sending values, a lot

The MDT Push Button Lite 55 Basic releases KNX telegrams depending on the paramerization after press...

€57,20 Excl. tax
€69,21 Incl. tax

Available

Add to cart More information

Glass Push Button Plus 8-fold surrounding orientation light

The MDT Glass Push Button releases KNX telegrams after touching the sensor areas on top, 1 or 2 button operation can be parameterized.

The MDT Glass Push Button releases KNX telegrams after touching the sensor areas on top, 1 or 2 butt...

€124,80 Excl. tax
€151,01 Incl. tax

Available

Add to cart More information

2 fold Temperature Controller / sensor flush mounted,

The MDT Temperature Controller is used for all purpose temperature control applications. The temperature is received as an KNX object or directly from the connected PT1000 temperature sensors (Only SCN-RT6AP.01, SCN-RT2UP.01 or SCN-RT4UP.01).

The MDT Temperature Controller is used for all purpose temperature control applications. The tempera...

€87,36 Excl. tax
€105,71 Incl. tax

Not available

Add to cart More information

Page 4 of 10 | Products