Collection

One relay contact as switching element
Bus-powered electronics
Integrated bus coupling unit, Bus connection via bus terminal block
Type of protection: IP 20
Rated contact voltage AC 230 V
Rated contact frequency: 50/60 Hz
Rated contact current 16 AX

The MDT Push Button Lite 63 releases KNX telegrams depending on the paramerization after pressing the buttons. The push buttons can be programmed for 1 or 2 button operation (BE-TAL63x4.01: 4 single buttons). The RGBW status LEDs can be controlled with in

The MDT Push Button Lite 55 releases KNX telegrams after pressing the buttons, 1 or 2 Button operation can be programmed.
Each button has two RGBW status LEDs. In addition to switching, dimming, shutters or sending values, numerous functions are availabl

LCM-40KN Constant Current LED Driver 40W 40 V, 45 V, 57 V, 67 V, 80 V, 100 V

PWM-60-24KN
AC-DC Single output LED driver Constant Voltage (CV); PWM output for LED strips; Output 24Vdc at 2.5A; Dimming with KNX; IP67

PWM-60-12KN
AC-DC Single output LED driver Constant Voltage (CV); PWM output for LED strips; Output 12Vdc at 5A; Dimming with KNX; IP67

The KNX TP Push Button 420 secure is a pushbutton insert with integrated bus coupler and mounting kit. The device is available with one or two rockers. Each rocker offers two pressure points (up/down). Artikel 5325 or 5375

Enhance your home automation with xxter iBeacons: location-based scenes, access, and presence detection without GPS.

The MDT KNX Push Button releases KNX telegrams after pushing the buttons on top.

The MDT Push Button Lite 55 Basic releases KNX telegrams depending on the paramerization after pressing the buttons.The push buttons can be programmed for 1 or 2 button operation. In addition to switching, dimming, blinds, scenes or sending values, a lot

For operation with a KNX power supply without integrated choke or for connection to the unchoked output of the KNX N 125/x2 power supplies
Low-voltage terminal for unchoked voltage and bus
Modular installation devices for mounting on TH35 EN 60715 mount

LCM-25KN Constant Current LED Driver 25W 24 V, 28 V, 36 V, 42 V, 50 V, 54 V with KNX

KNX BAOS MODUL 838 KBERRY
Die Weinzierl KNX BAOS Module sind eine leistungsfähige und kostengünstige Lösung für KNX Konnektivität in Form einer kompakten Platine. Sie richten sich vor allem an Hersteller,

RF-KNX compatible transmitter for general purpose which emulates the working mode of the channel code 0311h.
1 output channel.

The inputs of the MDT Universal Interface react depending on their programmed parameters and send a telegram on the KNX bus.
You can connect conventional push-buttons or auxiliary contacts (eg door and window contacts) to the device

For disconnecting the bus line from the power supply. The device has a reset switch for isolating the bus voltage and resetting the bus devices connected to this line. Connection to ABB i-bus® via bus connection terminal.

Diese Komponente gehört zum KNX-Modul Multi I/O 48 Kanäle Artikel 5267 und funktioniert nicht eigenständig!

The inputs of the MDT Universal Interface react depending on their programmed parameters and send a telegram on the KNX bus.
You can connect conventional push-buttons or auxiliary contacts (eg door and window contacts) to the device

PT 1000 Sensor ceiling installation
Cut out Diameter: 23mm, Depth: 28mm

UP 220/21
Pushbutton interface 2 x potential-free contact, output for LED control
2 inputs / outputs

Diese Komponente gehört zum KNX-Modul Multi I/O 48 Kanäle Artikel 5267 und funktioniert nicht eigenständig!

PT 1000 Sensor strap on installation
Dimensions 8mm x 40mm, cable length 3m

For connection of a modular bus device to the bus line
10-pole BTI socket (BTI - Bus Transceiver Interface) for plugging of bus terminal devices with BTI connector

Wall box made from galvanised steel. Fits Barchetto 6.
Size ca. 34x176x55