Collection
Metal built-in box for wall mounting For touch panel VisuControl 7 "/ 17.7 cm (wxhxd): 213 x 171 x 84 mm
€75,98 Incl. tax
Programming software VisuControl Pro tTo create individual solutions
VisuControl lite software already included in delivery
€479,92 Incl. tax
The MDT VisuControl Touch Panel is used for the visualisation of the current building status and to control building functions.
€103,50 Incl. tax
The MDT VisuControl Touch Panel is used for the visualisation of the current building status and to control building functions.
€103,50 Incl. tax
The MDT VisuControl Touch Panel is used for the visualisation of the current building status and to control building functions.
€103,50 Incl. tax
The MDT VisuControl Touch Panel is used for the visualisation of the current building status and to control building functions.
€78,18 Incl. tax
The MDT VisuControl Touch Panel is used for the visualisation of the current building status and to control building functions.
€78,18 Incl. tax
The MDT VisuControl Touch Panel is used for the visualisation of the current building status and to control building functions.
€78,18 Incl. tax
The MDT VisuControl Touch Panel is used for the visualisation of the current building status and to control building functions.
€2.141,64 Incl. tax
The MDT VisuControl Touch Panel is used for the visualisation of the current building status and to control building functions.
€1.810,89 Incl. tax
The MDT KNX RF+ Glas Push Button Plus releases KNX telegrams after touching the sensor areas on top, 1 or 2 button operation can be parameterized.
€223,68 Incl. tax
The MDT KNX RF+ Glas Push Button Plus releases KNX telegrams after touching the sensor areas on top, 1 or 2 button operation can be parameterized.
€178,38 Incl. tax
The MDT KNX RF+ Socket receives KNX/EIB telegrams and switches one electrical load.
€146,29 Incl. tax
The MDT KNX RF+ Socket receives KNX/EIB telegrams and switches one electrical load.
€126,47 Incl. tax
The MDT KNX RF+ Shutter Actuator receives KNX/EIB telegrams and controls 1 indipendent shutter or sunblind drive.
The output uses two monostable relays.
€146,29 Incl. tax
The MDT KNX RF+ Switch Actuator receives KNX/EIB telegrams ans switchs up to 2 indipendent electrical loads.
Each output uses a monostable relay.
€146,29 Incl. tax
The MDT KNX RF+ Wireless Switch Actuator receives KNX / EIB telegrams and switches one consumer. The output is switched via a monostable relay
€148,01 Incl. tax
The Universal Interface detects status changes at the inputes and triggers KNX telegrams depending on his parameterizations.
€150,89 Incl. tax
The MDT KNX Push Button Plus releases KNX telegrams after pushing the buttons on top.
€155,73 Incl. tax
The MDT KNX Push Button Plus releases KNX telegrams after pushing the buttons on top.
€146,29 Incl. tax
The MDT KNX Push Button Plus releases KNX telegrams after pushing the buttons on top.
€136,85 Incl. tax
The MDT KNX Push Button Plus releases KNX telegrams after pushing the buttons on top.
€126,47 Incl. tax
The MDT KNX RF+ Wireless Line Coupler connects MDT KNX RF+ devices with the KNX bus. The line coupler has extensive filtering functions to minimize bus load on the wireless route.
€268,93 Incl. tax
The MDT Motion Detector/Automatic Switch with light sensor captures the smallest movements with its built in pyro detectors and high resolution lens. It is possible to configure 2 separate light channels, one HVA channel and one channel for room monitorin
€121,91 Incl. tax