Collection
LCM-40KN Constant Current LED Driver 40W 40 V, 45 V, 57 V, 67 V, 80 V, 100 V
€66,21 Incl. tax
The MDT Push Button Lite 63 releases KNX telegrams depending on the paramerization after pressing the buttons. The push buttons can be programmed for 1 or 2 button operation (BE-TAL63x4.01: 4 single buttons). The RGBW status LEDs can be controlled with in
€67,64 Incl. tax
The MDT Push Button Lite 55 releases KNX telegrams after pressing the buttons, 1 or 2 Button operation can be programmed.
Each button has two RGBW status LEDs. In addition to switching, dimming, shutters or sending values, numerous functions are availabl
€67,64 Incl. tax
One relay contact as switching element
Bus-powered electronics
Integrated bus coupling unit, Bus connection via bus terminal block
Type of protection: IP 20
Rated contact voltage AC 230 V
Rated contact frequency: 50/60 Hz
Rated contact current 16 AX
€68,61 Incl. tax
The KNX TP Push Button 420 secure is a pushbutton insert with integrated bus coupler and mounting kit. The device is available with one or two rockers. Each rocker offers two pressure points (up/down). Artikel 5375 or 5325
€68,89 Incl. tax
The MDT Push Button Lite 55 Basic releases KNX telegrams depending on the paramerization after pressing the buttons.The push buttons can be programmed for 1 or 2 button operation. In addition to switching, dimming, blinds, scenes or sending values, a lot
€69,21 Incl. tax
For mounting in AP 118 automation module box or AP 641 room control box
€69,91 Incl. tax
LCM-60KN Constant Current LED Driver 60W 42 V, 57 V, 67 V, 86 V, 90 V
€69,91 Incl. tax
The MDT KNX Push Button releases KNX telegrams after pushing the buttons on top.
€70,00 Incl. tax
Remote control for lighting and shutters/blinds control.
Five different channels and five different scenes.
€70,34 Incl. tax
The MDT Push Button Lite 63 releases KNX telegrams depending on the paramerization after pressing the buttons. The push buttons can be programmed for 1 or 2 button operation (BE-TAL63x4.01: 4 single buttons). The RGBW status LEDs can be controlled with in
€70,79 Incl. tax
The MDT Push Button Lite 63 releases KNX telegrams depending on the paramerization after pressing the buttons. The push buttons can be programmed for 1 or 2 button operation (BE-TAL63x4.01: 4 single buttons). The RGBW status LEDs can be controlled with in
€70,79 Incl. tax
The MDT Push Button Lite 55 releases KNX telegrams after pressing the buttons, 1 or 2 Button operation can be programmed.
Each button has two RGBW status LEDs. In addition to switching, dimming, shutters or sending values, numerous functions are availabl
€70,79 Incl. tax
The MDT Push Button Lite 55 releases KNX telegrams after pressing the buttons, 1 or 2 Button operation can be programmed.
Each button has two RGBW status LEDs. In addition to switching, dimming, shutters or sending values, numerous functions are availabl
€70,79 Incl. tax
The MDT Push Button Lite 63 releases KNX telegrams depending on the paramerization after pressing the buttons. The push buttons can be programmed for 1 or 2 button operation (BE-TAL63x4.01: 4 single buttons). The RGBW status LEDs can be controlled with in
€71,57 Incl. tax
The MDT Push Button Lite 55 releases KNX telegrams after pressing the buttons, 1 or 2 Button operation can be programmed.
Each button has two RGBW status LEDs. In addition to switching, dimming, shutters or sending values, numerous functions are availabl
€71,57 Incl. tax
With 4 inputs / outputs each configurable for potential-free contacts or for control of an LED (max 2 mA)
With integrated bus coupling unit, bus connection via bus terminal
8-wire plug-in cable set, 280 mm long, extendable to a max. of 10 m
€71,73 Incl. tax
UP 285/13
Pushbutton, single, with status LED, titanium white, DELTA style
Pushbutton in pair
Vertical operation
Per pushbutton selectable function
LED for orientation light
Connectable bus coupling unit (BTM) or flush-mounted actuators via BTM
€72,06 Incl. tax
The MDT Switch Actuator AKK receives KNX/EIB telegrams and switches up to 3 independent electrical loads.
Each output uses relay (AKK-01UP.03: bistable relais, AKK-02/03UP.03: monostable relais).
€73,14 Incl. tax
Wireless KNX-RF S-Mode Pushbutton Interface which allows the control of Switching, Dimming or Blinds Actuators.
Incorporates 2 inputs, each of which can be parameterized individually through the ETS:
Control of 1 or 2 independent output channels.
€73,27 Incl. tax
The MDT Push Button Lite 63 releases KNX telegrams depending on the paramerization after pressing the buttons. The push buttons can be programmed for 1 or 2 button operation (BE-TAL63x4.01: 4 single buttons). The RGBW status LEDs can be controlled with in
€74,72 Incl. tax
The MDT Push Button Lite 55 releases KNX telegrams after pressing the buttons, 1 or 2 Button operation can be programmed.
Each button has two RGBW status LEDs. In addition to switching, dimming, shutters or sending values, numerous functions are availabl
€74,72 Incl. tax
The MDT Push Button Lite 63 releases KNX telegrams depending on the paramerization after pressing the buttons. The push buttons can be programmed for 1 or 2 button operation (BE-TAL63x4.01: 4 single buttons). The RGBW status LEDs can be controlled with in
€75,50 Incl. tax
The MDT Push Button Lite 63 releases KNX telegrams depending on the paramerization after pressing the buttons. The push buttons can be programmed for 1 or 2 button operation (BE-TAL63x4.01: 4 single buttons). The RGBW status LEDs can be controlled with in
€75,50 Incl. tax
The MDT Push Button Lite 55 releases KNX telegrams after pressing the buttons, 1 or 2 Button operation can be programmed.
Each button has two RGBW status LEDs. In addition to switching, dimming, shutters or sending values, numerous functions are availabl
€75,50 Incl. tax
The MDT Push Button Lite 55 releases KNX telegrams after pressing the buttons, 1 or 2 Button operation can be programmed.
Each button has two RGBW status LEDs. In addition to switching, dimming, shutters or sending values, numerous functions are availabl
€75,50 Incl. tax
Metal built-in box for wall mounting For touch panel VisuControl 7 "/ 17.7 cm (wxhxd): 213 x 171 x 84 mm
€75,98 Incl. tax
The KNX RF / ENO Push Button 440 secure unites two wireless protocols in one device: EnOcean and KNX RF. Out of the box the push button operates in EnOcean mode.
€77,23 Incl. tax
- 1 channel
- Modular installation device for mounting in AP 118 automation module box or AP 641 room control box
€77,75 Incl. tax
The MDT KNX Push Button releases KNX telegrams after pushing the buttons on top.
€77,86 Incl. tax
The MDT VisuControl Touch Panel is used for the visualisation of the current building status and to control building functions.
€78,18 Incl. tax
The MDT VisuControl Touch Panel is used for the visualisation of the current building status and to control building functions.
€78,18 Incl. tax
The MDT VisuControl Touch Panel is used for the visualisation of the current building status and to control building functions.
€78,18 Incl. tax
Interface with 4 independent channels, which can work as Binary Input or LED Output.
Equipped with 4 Digital (Binary) inputs which may be conmnected to a conventional push-button, switch or binary sensor with free-voltage
€78,55 Incl. tax
The MDT Push Button Lite 63 releases KNX telegrams depending on the paramerization after pressing the buttons. The push buttons can be programmed for 1 or 2 button operation (BE-TAL63x4.01: 4 single buttons). The RGBW status LEDs can be controlled with in
€78,65 Incl. tax
The MDT Push Button Lite 63 releases KNX telegrams depending on the paramerization after pressing the buttons. The push buttons can be programmed for 1 or 2 button operation (BE-TAL63x4.01: 4 single buttons). The RGBW status LEDs can be controlled with in
€78,65 Incl. tax